Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

twin sticks: how do they work

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

twin sticks: how do they work

Post by 80's_delirious »

I've always assumed twin sticks work by using one to select 2wd or 4wd, and the other to select either high or low range. Is this correct?

What are the advantages or disadvantages of twin sticks vs standard shifted arrangement?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: twin sticks: how do they work

Post by Willy Hilux »

Correct.... :armsup:

Advantage is to be able to select 2wd low range maybe for rear burns etc....
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Re: twin sticks: how do they work

Post by De-lux »

Do they allow you to do front digs (ie do they disconnect the front driveshaft?) or is that something different?
indubitably
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: twin sticks: how do they work

Post by 80's_delirious »

No front diggety dig with twin sticks alone.

You need a 'rear disconnect' coupler on the rear tailshaft/transfer case and need to be in 4wd to do front digs
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: twin sticks: how do they work

Post by Tiny »

De-lux wrote:Do they allow you to do front digs (ie do they disconnect the front driveshaft?) or is that something different?
No you need a magna for digs :D 239...... Biatch lol
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: twin sticks: how do they work

Post by GUtripper »

Unless, of course, you have an Atlas.....
Then it's one lever for front one for rear, each with low-neutral-high
Then you can dig.
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: twin sticks: how do they work

Post by Mr DJ »

Or a Dana 300 from a early 80's jeep, it works same as Atlas.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 1740
Joined: Thu Mar 01, 2007 12:45 pm
Location: Brisneyland

Re: twin sticks: how do they work

Post by RO8M »

Willy Hilux wrote:Correct.... :armsup:

Advantage is to be able to select 2wd low range maybe for rear burns etc....
Is it a big modification to do? Or rather, is it a modification that can be done to any box?
My name is Rob.

His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.

This is legal advice.
Posts: 1167
Joined: Tue Jun 16, 2009 10:42 am
Location: campbelltown

Re: twin sticks: how do they work

Post by MogLux »

RO8M wrote:
Willy Hilux wrote:Correct.... :armsup:

Advantage is to be able to select 2wd low range maybe for rear burns etc....
Is it a big modification to do? Or rather, is it a modification that can be done to any box?
On a hilux transfer you will need to dismember it ... the lockout pin between the 2 rails needs to be removed to enable you to get 2wd low range.
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: twin sticks: how do they work

Post by SierraDan »

Mr DJ wrote:Or a Dana 300 from a early 80's jeep, it works same as Atlas.
What's the difference in price/availability?
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: twin sticks: how do they work

Post by GUtripper »

Dana 300's are thin on the ground, unless you know someone with (a good) one. You could pay anywhere from $500-$1000, but then may need a rebuild kit, adaptor, clocking ring, and a twin stick kit. Then add yokes/tailshaft mods etc, you are better off to go an Atlas for a few $ more, which will be stronger with more options in terms of output gearing/ratios.
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: twin sticks: how do they work

Post by SierraDan »

Yeah figured as much, cheers.
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Re: twin sticks: how do they work

Post by Clanky »

Cheap and easy to unlock your manual front hubs say for a boat ramp or backing your caravan up a steep drive
If you have a centre diff lock - you also need to lock it with an override switch :armsup:

That said being able to disconnect the steering axle from the seat and keep it in low helps with maneuverability in tight spots.

Or buy an old G60 Patrol. They came with twin sticks at no extra charge :idea:
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: twin sticks: how do they work

Post by SierraDan »

If you have rear steer you can do rear digs ;)
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: twin sticks: how do they work

Post by Mr DJ »

GUtripper wrote:Dana 300's are thin on the ground, unless you know someone with (a good) one. You could pay anywhere from $500-$1000, but then may need a rebuild kit, adaptor, clocking ring, and a twin stick kit. Then add yokes/tailshaft mods etc, you are better off to go an Atlas for a few $ more, which will be stronger with more options in terms of output gearing/ratios.
True, tho as it has same bolt pattern as an Atlas you will need the adapter anyway, the clocking ring can be done by just drilling & tapping new holes just where you want them & the twin sticks you make yourself they are easy as cause I made mine :)
It's only really if you want/need any upgraded internals or outputs that the price starts to go up & unless your running decent HP (V8) that won't be required.

My 2c worth anyway.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: twin sticks: how do they work

Post by Willy Hilux »

You don't really need twin sticks to give ya self low range two wheel drive. You can do it by just taking out the locking pin and use a standard lever. The only problem is knowing what gear you are in. It can get confusing but can be done...... Just heaps of practice :?
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests