greg wrote:bigsteve wrote:I still reckon you should have hit that last section in 4h
I would have - but for some reason the engine bogged down... must have been some extra weight in the car somewhere
I told you that winch was too heavy.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rebuilding Greg's Sierra
Well,
As of last week I have started approaching an engineer to see about getting my little car legal and legit for its on-road duties... I'm getting sick of driving around fearful that I'll end up with a yellow sticker on the windscreen.
I called up and had a chat to the fellow on Wednesday for a few seconds before faxing through to him a little list of all the mods that are non standard (oddly enough) on the car.
Did a follow up call on the friday for a few minutes and i must say - things were more positive than i expected - didn't get laughed at or anything so that has to be a good start.
First issue to come up for the car though has concerned emissions for the non-standard engine. Apparently because the engine is out of a japanese car, it may not meet ADR 37 - Emmissions for Aust Cars rulings.
So apparently the first option is to get a fancy lab mob somewhere to do some test on the car... But rather than doing that i am currently trying to track down a fellow that used to import Cappuccinos and get a copy of his document stating that Cap's require no changes to meet the ADR37 requirements.
Hopefully if i get this document i won't have to get the tests done :fingers crossed:...
On top of this i still have a few more things to clean up on the car before taking it in for its first "check over" by the engineer. So hopefully these little changes aren't too far away.
The other thing that i'm up to at the moment is sourcing a bling new radiator for the car - she's running a tad warm so some enhanced cooling ability is required.
As of last week I have started approaching an engineer to see about getting my little car legal and legit for its on-road duties... I'm getting sick of driving around fearful that I'll end up with a yellow sticker on the windscreen.
I called up and had a chat to the fellow on Wednesday for a few seconds before faxing through to him a little list of all the mods that are non standard (oddly enough) on the car.
Did a follow up call on the friday for a few minutes and i must say - things were more positive than i expected - didn't get laughed at or anything so that has to be a good start.
First issue to come up for the car though has concerned emissions for the non-standard engine. Apparently because the engine is out of a japanese car, it may not meet ADR 37 - Emmissions for Aust Cars rulings.
So apparently the first option is to get a fancy lab mob somewhere to do some test on the car... But rather than doing that i am currently trying to track down a fellow that used to import Cappuccinos and get a copy of his document stating that Cap's require no changes to meet the ADR37 requirements.
Hopefully if i get this document i won't have to get the tests done :fingers crossed:...
On top of this i still have a few more things to clean up on the car before taking it in for its first "check over" by the engineer. So hopefully these little changes aren't too far away.
The other thing that i'm up to at the moment is sourcing a bling new radiator for the car - she's running a tad warm so some enhanced cooling ability is required.
DMA Founding Member #1 - Now Retired
Progress Report:
One of the zook club members has whipped me up a little gizmo that will supply a pulse to the computer to make it think that the speedo is hooked up and working. This, once installed, will mean that the check engine light will no longer come on after driving around for a little while (hooray)
In other news, no other progress has been made.
The engineer hasn't called me back, and i'm still hassling the cappuccino guy to get me the details of emissions for caps so i can use that too.
One day
One of the zook club members has whipped me up a little gizmo that will supply a pulse to the computer to make it think that the speedo is hooked up and working. This, once installed, will mean that the check engine light will no longer come on after driving around for a little while (hooray)
In other news, no other progress has been made.
The engineer hasn't called me back, and i'm still hassling the cappuccino guy to get me the details of emissions for caps so i can use that too.
One day
DMA Founding Member #1 - Now Retired
greg wrote:Progress Report:
One of the zook club members has whipped me up a little gizmo that will supply a pulse to the computer to make it think that the speedo is hooked up and working. This, once installed, will mean that the check engine light will no longer come on after driving around for a little while (hooray)
In other news, no other progress has been made.
The engineer hasn't called me back, and i'm still hassling the cappuccino guy to get me the details of emissions for caps so i can use that too.
One day
No mention of the ejected grill???
yeshemesh
greg wrote:grimbo wrote:you know you want to sell it and get a Grand Vitara why fight it
I wouldn't even need a grand vitara grimbo - even this 4wd gti-r i'm after would allow me to outdrive you
hey you don't want to bank a cheque your...... how does that saying go? It would have been really good and you would have felt scared
You'll get a gti-r when my Zuk gets back on the road
Its a Starlet for you my girls car driver of the futureRansom note = demand + collage
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!
BTT
Thought i'd re-hash this seeing though its been a few months and Gerg is living happily in his blissful non-internt world
besides its the only 4x4 i'll get to work on for a little while.
Whats been happening this winter:
~ Gearbox rebuilt.
~ Calmini Flares fitted
~ New front clip (Drover clip replaced with 1.3 front clip)
~ Respray (Drab of course)
~ New wheels and tyres (Holy F$%&*g Bling)
Sorry no pics, you will just have to wait til tomorrow
Thought i'd re-hash this seeing though its been a few months and Gerg is living happily in his blissful non-internt world
besides its the only 4x4 i'll get to work on for a little while.
Whats been happening this winter:
~ Gearbox rebuilt.
~ Calmini Flares fitted
~ New front clip (Drover clip replaced with 1.3 front clip)
~ Respray (Drab of course)
~ New wheels and tyres (Holy F$%&*g Bling)
Sorry no pics, you will just have to wait til tomorrow
yeshemesh
bigsteve wrote:DeWsE wrote:Sorry no pics, you will just have to wait til tomorrow
Not happy Steve!
What can I say I like to tease
Austin Powers wrote: OOooooo behave
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
That’s looking real cool now.
Let Greg know that a friend of mine imported some of those rims from America. They rusted very quickly and they are fairly high maintenance to keep shiny. I think it was because of the chrome quality, then again Greg’s might be Australian?
Let Greg know that a friend of mine imported some of those rims from America. They rusted very quickly and they are fairly high maintenance to keep shiny. I think it was because of the chrome quality, then again Greg’s might be Australian?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Who is online
Users browsing this forum: No registered users and 10 guests