Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing swivel hub housing from axel tube

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Removing swivel hub housing from axel tube

Post by Davidh »

Hey guys,

Can I simply remove the brake caliper, then unbolt the swivel housing from the axel tube and slide off the whole assembly from the inner axle?
Or is the inner axle circliped to the front of the cv?
I intend to change the swivel housing ball seal without dismantling the whole hub assembly. Is this possible?

Oh yeah, 91 Disco, 10 spline unit with the little stub axles!
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

Yes you can remove the whole unit....
and yes the seal can be replaced without disassembly
Top
Posts: 500
Joined: Tue Nov 04, 2003 2:00 am
Location: Canada

Post by red90 »

Yep, that is the easiest way. The inner shaft is circlipped to the CV so it will come with the assembly, but that is fine. It is heavy when done this way, so be prepared for the weight.

Ouch, 10 spline. Just don't look at the diff splines when it is out :)
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

Great! Thanks guys!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 9 guests