While I know this is not a common engine here in Australia, I'm hoping somebody here will have experiance with it. (also the reason why I've posted here instead of GM section)
Like Milo, I'm also building a tow Rig, Mine is a 1990 C2500 picku, extra cab & Long wheel base.
Lowered 8" alloys yada yada yada.
I bought it less motor and box, which brings me to my currrent question.
I've bought a Vortec 8100 which for the uneducated a 496 cube gen VII big block, loosly based on the LS series.
As far as I'm able to find out, the PCM programming is almost identical to the LS engines as well,
What I need to find out if I can disable two of the 4 oxygen sensors so I can run aftermarket headers and Cats.
I'm hoping that with a cam, exhaust, decent air intake and a mafless tune it'll make close to 500hp on normal unleaded
as the highest spec version of this engine made 425hp in a 50 states smog legal form.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vortec 8100 questions
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Vortec 8100 questions
Should be no reason why they can't numb rear 02 sensors when you get a tune and remap computer.all the ve and vz commodores were done once out of warranty and exhaust upgrade was done.
Who is online
Users browsing this forum: No registered users and 1 guest