Just wondering if anyone has had problems with aftermarket HID balasts causeing radio static.
I have 240 XGTs with the lightforce 70 watt kit and once the lights warm up the radio turns to shit
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
70watt HID problem
Moderator: -Scott-
70watt HID problem
02 coil cab GU 5" lift twin locked custom tray 35s 4:6 diff ratios 3" straight through
Re: 70watt HID problem
Easy fixed, and has been covered before in another thread by me years ago, with photos.
Basically grab cable shielding stuff from Jaycar or any of the big electronic mobs. Covered the high tension leads individually and earth the sheild. The high tension leads from the ballast to the bulbs are acting like an antenna blurting out all of that high fequency 90 volts. Need to contain it within this shield cable stuff.
Could also always just turn the radio off / turn on MP3 player.
Basically grab cable shielding stuff from Jaycar or any of the big electronic mobs. Covered the high tension leads individually and earth the sheild. The high tension leads from the ballast to the bulbs are acting like an antenna blurting out all of that high fequency 90 volts. Need to contain it within this shield cable stuff.
Could also always just turn the radio off / turn on MP3 player.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Re: 70watt HID problem
which ones are the high tension ones? and wat is the sheild
02 coil cab GU 5" lift twin locked custom tray 35s 4:6 diff ratios 3" straight through
Re: 70watt HID problem
ok thanks for the help and the sheild is the larger flat rectangle peice?
02 coil cab GU 5" lift twin locked custom tray 35s 4:6 diff ratios 3" straight through
Who is online
Users browsing this forum: No registered users and 10 guests