Just had the head redone been back on the road now for 3 weeks and a metallic whine started coming from engine bay. Checked all fluid levels and everything is as it should be so assumed it was a noisy pulley.
Pulling into work today I noticed and have had it commented before that there was a knock noise and the whine had gone. This knock is erratic and increases with engine rpm and only seems to turn up after a period of driving. (It's a half hour drive to work at freeway speeds.)
Does this sound right. My best guess is a collapsed / collapsing bearing on the belt tensioner.
Will be looking at it some more when I get home just after the general best guess of the outers collective.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Advice needed on knock from 1fzfe
Moderators: toaddog, Elmo, DUDELUX
Advice needed on knock from 1fzfe
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Re: Advice needed on knock from 1fzfe
Update 1 didn't do it coming home today at all and I purposely drove it harder home to try and make it happen again. This morning it did it while driving and while at a standstill I should add
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Re: Advice needed on knock from 1fzfe
howsie wrote:Just had the head redone been back on the road now for 3 weeks and a metallic whine started coming from engine bay. Checked all fluid levels and everything is as it should be so assumed it was a noisy pulley.
Pulling into work today I noticed and have had it commented before that there was a knock noise and the whine had gone. This knock is erratic and increases with engine rpm and only seems to turn up after a period of driving. (It's a half hour drive to work at freeway speeds.)
Does this sound right. My best guess is a collapsed / collapsing bearing on the belt tensioner.
Will be looking at it some more when I get home just after the general best guess of the outers collective.
Are you sure it's coming from the front. If its erratic it could be a bearing has spun. I had the same thing happen to an old 2.8 and yes I know apples and oranges. But the principle is the same. A reworked head will put more stress on the bottom end in my experience. How many ks on the motor in general.
Re: Advice needed on knock from 1fzfe
We might need a bit more information to help you with this one, if you can get it to do it again listen to see if it coming from outside or inside the engine. A long screwdriver on the tappet cover and put your ear to the handle will quickly determine if it from inside the engine.
Who is online
Users browsing this forum: No registered users and 77 guests