Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extended front tailshaft, 84 model hilux

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 39
Joined: Sun Apr 11, 2004 4:16 pm

Extended front tailshaft, 84 model hilux

Post by Odum »

Hi

Im just finishing off my 84 hilux build up, 35 inch BFG's mudds, 4 inch lift, snake racing drop drag and torque rod.

Im worried about my front tail shaft, it looks like it will pull apart on full droop.

What have people done to overcome this ?

thanks
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

made longer shafts ... :D
or made\had made shafts with extended slip joints ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

get a longer slip joint put into it
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 39
Joined: Sun Apr 11, 2004 4:16 pm

Post by Odum »

are these commercially avaiable ? from who ?
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

any drive shaft mob should b able 2 help u out
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 153
Joined: Tue Apr 20, 2004 8:56 am
Location: Sydney

contact number

Post by Luv to 4B »

Im not sure where you are located but Drive Shaft Engineering in Kirrawee (02 9545 6522) were very helpful with some stuff I had done and the price was right too. Hope this might help.

Sounds like a top rig.
My mind is like a steel trap....quite dangerous because i forget where i left it.
Top
Posts: 35
Joined: Sat Nov 29, 2003 9:06 pm

Post by brad84hilux »

I have a similair setup.

http://oz4b.com/trucks/truckprofile.php?id=1

No idea what they've done with my front tail shaft, I thought it was standard. I'll take some pics and send them too you.
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

Fit a hi pinion diff in the front It also takes the radical angle of the unis
and keeps the shaft about 5" higher

Adrian
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

Just test it first.Put it in reverse and pin it down the road and slam on the brakes if the shaft pulls apart it needs to be lenghthen.
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

I built one out of box section
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

I built one out of box section
Top
Posts: 151
Joined: Thu Dec 04, 2003 6:37 pm
Location: Springwood NSW

Post by Eddywelder »

give "Drivetrain " a call, they are building my front and rear shafts with longer slip joints.....9679 7747 located in arndell park sydney
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 2 guests