Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ axle shattered

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

MQ axle shattered

Post by beefie »

thats right no twist just shattered. and it's also taken out the center :shock: short side rear :bad-words:
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

a better view

is this a common problem

cheers

beefie
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

*round of applause*
This is not legal advice.
Top
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

Post by Heathx4 »

Nasty! So... how'd you do it? I'd like to avoid the occurance if possible.
* Nothing is foolproof to a sufficiently talented fool *
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Geezuz. How did that happen?

Definatly NOT a common problem at all. Especially in the rear. If anything would go i would of thought it to be the front...... Even then its pretty hard to do that.

Wat were u doing? trying to pull burnouts with a brand new clutch on 38's on a dry bitumen road?

Ive got a spare or 3 if u need one ;)

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

:shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock:

bet the burnout was spectacular till it broke !!! :finger:

1st one I've ever seen go :cool:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

This is how he did it. Not much to it actually.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

broke

Post by DR Frankenstine »

Unbelievable :? I have only ever broken rear axles at the bearing(nasty the wheel falls off) common problem i'm told
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

ive never had that problem either
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

COOL!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

nice!! :D
hands and mums dont count!!!
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

yahoo back on the road . but unlocked spare diff is 4 pinion h233.
lockright is for 2 pinion h260.

still don't know why it gave up the way it did. :? :?

such is life
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Screwy_ScrewBall wrote:Geezuz. How did that happen?

Definatly NOT a common problem at all. Especially in the rear. If anything would go i would of thought it to be the front...... Even then its pretty hard to do that.

Wat were u doing? trying to pull burnouts with a brand new clutch on 38's on a dry bitumen road?

Ive got a spare or 3 if u need one ;)

Screwy


And a 454 Chevy in front!!!!!!!!!!!
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

beefie wrote:yahoo back on the road . but unlocked spare diff is 4 pinion h233.
lockright is for 2 pinion h260.

still don't know why it gave up the way it did. :? :?

such is life


so the axle you blew was from an MQ H260? thats a 1.51" 37 spline axle.. :crazyeyes:
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Wendle wrote:
beefie wrote:yahoo back on the road . but unlocked spare diff is 4 pinion h233.
lockright is for 2 pinion h260.

still don't know why it gave up the way it did. :? :?

such is life


so the axle you blew was from an MQ H260? thats a 1.51" 37 spline axle.. :crazyeyes:


I read that and thought the same thing, and then thought, I think he bought a lockright from a dude with a H260.

How many splines (little grooves) on the broken piece of axle?!! 31 or 33 or 37?
hands and mums dont count!!!
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

yeah,

mine busted in the same spot but on the long side... love that locker, drove the rest of the way out of the trail in 3 wheel drive
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

bj on roids wrote:
Wendle wrote:
beefie wrote:yahoo back on the road . but unlocked spare diff is 4 pinion h233.
lockright is for 2 pinion h260.

still don't know why it gave up the way it did. :? :?

such is life


so the axle you blew was from an MQ H260? thats a 1.51" 37 spline axle.. :crazyeyes:


I read that and thought the same thing, and then thought, I think he bought a lockright from a dude with a H260.

How many splines (little grooves) on the broken piece of axle?!! 31 or 33 or 37?


sorry guys the center i destroyed was h260 with lockright installed
the one im now running is h233 witch is a 4 pinion.and both h233 and h260 are 31 spline.
will find another h260 center to fit lockright . so i will be locked once again :lol:
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

i did one in the GU :cry:

http://www.4wdlinks.com.au/videos/2003a ... d3nr14.mpg
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

So that is a broken H260. SWEEET!!! :lol:
hands and mums dont count!!!
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »



a rear or front.... its hard to tell in the video. is it a 37spl rear? you weren't even on it, there was nothing bound up... maybe fatigue got it, or poor design??

(the video isn't real clear, so i may be way off base)
hands and mums dont count!!!
Top
Posts: 239
Joined: Sun Feb 15, 2004 5:36 am
Location: Maryland, USA

Contact:
Contact XterraGuy

Post by XterraGuy »

beefie wrote:[sorry guys the center i destroyed was h260 with lockright installed
the one im now running is h233 witch is a 4 pinion.and both h233 and h260 are 31 spline.


Wait, am I reading this right? There were 31-spline H260s? That's a pretty small shaft for what is otherwise a heavy-duty axle isn't it?
And am I just totally off my rocker, or does what I'm reading imply that H233B and H260 centers are interchangeable into the H260 housing if indeed they have a common spline count? I would prefer to think you swapped an entire H233B in place of the H260 for now, much easier to get my head around...

Brent
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Top
Posts: 89
Joined: Tue Sep 30, 2003 7:06 pm
Location: Newcastle

Post by beefie »

XterraGuy wrote:
beefie wrote:[sorry guys the center i destroyed was h260 with lockright installed
the one im now running is h233 witch is a 4 pinion.and both h233 and h260 are 31 spline.


Wait, am I reading this right? There were 31-spline H260s? That's a pretty small shaft for what is otherwise a heavy-duty axle isn't it?
And am I just totally off my rocker, or does what I'm reading imply that H233B and H260 centers are interchangeable into the H260 housing if indeed they have a common spline count? I would prefer to think you swapped an entire H233B in place of the H260 for now, much easier to get my head around...

Brent


yes thats right thay use the same housing :D
Top
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

beefie wrote:
XterraGuy wrote:
beefie wrote:[sorry guys the center i destroyed was h260 with lockright installed
the one im now running is h233 witch is a 4 pinion.and both h233 and h260 are 31 spline.


Wait, am I reading this right? There were 31-spline H260s? That's a pretty small shaft for what is otherwise a heavy-duty axle isn't it?
And am I just totally off my rocker, or does what I'm reading imply that H233B and H260 centers are interchangeable into the H260 housing if indeed they have a common spline count? I would prefer to think you swapped an entire H233B in place of the H260 for now, much easier to get my head around...

Brent


yes thats right thay use the same housing :D


beefie, how does 27mm more ring gear fit into the h233b housing?
or are you referring to the h233 housing that is found in MQs and not the h233b? is there even a difference in these two axles? the h233 and h233b?
i started another post about questions on diff gearing and was given the link to this thread. i was planning on making a custom housing using 33-spline h233b diffs but if i can fit a h260 diff in a h233b housing i'll gladly take the 37-splines :D
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Top
Posts: 239
Joined: Sun Feb 15, 2004 5:36 am
Location: Maryland, USA

Contact:
Contact XterraGuy

Post by XterraGuy »

Apparently the MQ H260 was only a 31-spline unit.
In search of an MQ (offset) H233b rear, housing only preferred, plus a complete GQ or GU front (4.6 ratio ideal) to be shipped to the US. Cheap! Email/PM if you can help.
Top
Posts: 26
Joined: Tue Feb 25, 2003 10:13 am
Location: NJ, USA

Post by zeeto »

yeah that's what it seemed like brent.
but the question would be if you could fit the 37-spline into a h233 housing...
CAUTION: Insanity has replaced reason in the design and construction of this vehicle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 48 guests