Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diesel engine cut off switch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 40
Joined: Mon Aug 06, 2012 8:52 pm
Location: glass house mountains

diesel engine cut off switch

Post by Hiluxpower »

Just wont to no how and the best way to install a engine cut off switch 4 comp use in a hilux with a diesel in it thanks
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Re: diesel engine cut off switch

Post by chunderlicious »

remove or power (whichever way it works on your motor) the fuel cut solenoid through a relay and a switch. if it is for safety legalities i.e. cams, you may find it needs to be a mechanical cutoff and you will need to see the governing bodies rules on what needs to be cut off i.e. fuel, power, etc.
turbos are nice but i'd rather be blown
Posts: 187
Joined: Sat Jan 26, 2008 10:46 am
Location: Australia

Re: diesel engine cut off switch

Post by MikeH »

electric cutoff as you describe is perfectly acceptable for CAMS.
I use a two pole waterproof pushbutton switch. one pole cuts power to the fuel pump solenoid and the other pole cuts the ground wire off the Battery isolator solenoid.
reason for the two poles is the alternator will provide power to keep the fuel pump going if you cut the battery.
reason for switching ground on the solenoid is that a single wire is needed and the positive side of the solenoid gets power from a fuse holder across the terminals.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests