Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux 2.8 front drive shaft is to short?
Moderators: toaddog, Elmo, DUDELUX
Hilux 2.8 front drive shaft is to short?
Hey everybody so I just fitted some standard rear leafs up the front of my Hilux with 2inch extended shackles, on full flex it drops out of the spline :( I've already got a 40mm spacer fitted too, what can I do about this? Got a quote of $400 to get a longer one made up but don't wanna fork out that much just yet. Is there any other shafts off different 4wds that might fit? Love to hear everyone's thoughts an ideas and what they've done to overcome this problem.
Re: Hilux 2.8 front drive shaft is to short?
short answer............................ nup
Long answer ............................ get a long spline shaft made up
Long answer ............................ get a long spline shaft made up
Re: Hilux 2.8 front drive shaft is to short?
Make a box front shaft, very easy. Do a search on here as it has been explained extensively with photos.
Old and rolled: 94 lux, 37's, air lockers f/r, high steer, ruf, ifs rears, widetracked, longs, duals
New: 90 4runner 80 series diffs, air lockers f/r, LS1, reduction gears, 35's, engineered
New: 90 4runner 80 series diffs, air lockers f/r, LS1, reduction gears, 35's, engineered
Who is online
Users browsing this forum: No registered users and 26 guests