Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gigglepin hell fires
Moderators: toaddog, TWISTY, V8Patrol, Moderators
gigglepin hell fires
does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
Re: gigglepin hell fires
Jive wrote:does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
I am quite sure both.
David Metcalfe, runs Xtreme 4X4 Sport which is the home of ARB Xtreme Winch Challenge Series, Xtreme International & 4WD Angel Adventure supporting Angel Flight Australia
Re: gigglepin hell fires
Jive wrote:does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
Jive
PM Smithy jnr on here he is the gigglepin agent in Australia and was navi for them in KOH 2013 ... Wayne is a top bloke and will surely answer any questions you have..
http://www.smithiengineering.com.au" onclick="window.open(this.href);return false; or email him on wayne@smithiengineering.com.au
only just sore this post..
Matt
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: gigglepin hell fires
Test fitted the Hellfires to a standard Warn 8274 on the weekend, and yes they do fit.
However the fit over the Warn gear in the top housing is a little loose, it has about .5mm play between the original top housing gear and the Hellfire adaptor.
I then tried it out on the GP +25% gearset, that are made to fit the standard Warn gearbox top and it is a perfect fit, no play between the top gear and the adaptor at all.
So if you are thinking about fitting a set of Hellfire ratios, my recommendation would be to fit the GP+25% ratios to the top housing at the same time
, (as you have to press the shaft out of the top housing anyway). It would make for a very quick single or in-line motor winch(flamin fab style).
However the fit over the Warn gear in the top housing is a little loose, it has about .5mm play between the original top housing gear and the Hellfire adaptor.
I then tried it out on the GP +25% gearset, that are made to fit the standard Warn gearbox top and it is a perfect fit, no play between the top gear and the adaptor at all.
So if you are thinking about fitting a set of Hellfire ratios, my recommendation would be to fit the GP+25% ratios to the top housing at the same time
, (as you have to press the shaft out of the top housing anyway). It would make for a very quick single or in-line motor winch(flamin fab style).
Re: gigglepin hell fires
What's that combo worth smithy?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: gigglepin hell fires
X2WICKED wrote:What's that combo worth smithy?
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: gigglepin hell fires
So Bow have launched the Bow3 motor...... Rated at 9 HP.
Mmmmmmmm.
Details Smithy?
Mmmmmmmm.
Details Smithy?
My friends aren't holding me back..... I'm pulling 'em forward.
Who is online
Users browsing this forum: No registered users and 2 guests