Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NS Bullbar fits NW Pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 511
Joined: Tue Jan 15, 2008 1:33 pm
Location: Cooma NSW

NS Bullbar fits NW Pajero

Post by date »

Well, yesterday I received my new Bullbar. Bought off ebay, genuine Mitsubishi steel bar (non-winch) brand new for $620. Only doubt (other than normal ebay - is it a scam etc) was that it was to suit a NS model. Well, it fitted really well. Usual problems in finding out which bits to undo and which bits we forgot when putting it all together, but it is strong, well finished and hopefully will outlast the car. The nagging doubt that somehow MItsubishi had done some slight changes and we would have to fabricate up some bits to make it fit were dispelled. Absolutely buggered, but very happy.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: NS Bullbar fits NW Pajero

Post by -Scott- »

date wrote:Well, yesterday I received my new Bullbar. Bought off ebay, genuine Mitsubishi steel bar (non-winch) brand new for $620. Only doubt (other than normal ebay - is it a scam etc) was that it was to suit a NS model. Well, it fitted really well. Usual problems in finding out which bits to undo and which bits we forgot when putting it all together, but it is strong, well finished and hopefully will outlast the car. The nagging doubt that somehow MItsubishi had done some slight changes and we would have to fabricate up some bits to make it fit were dispelled. Absolutely buggered, but very happy.
That's good to know. Thanks for posting the info. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest