Hi,
I am replacing the rear shocks in my 120 Prado. The factory shocks are adjustable in this model however.
Can anyone who has experience in this please let me know how I should disconnect / disable the in dash adjustment for shock firmness?
Any advice would be appreciated.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Prado 120 Grande Rear Shocks - Replacement
Moderators: toaddog, Elmo, DUDELUX
Re: Prado 120 Grande Rear Shocks - Replacement
just unplug them. as long as u dont play with the switch the car wont care there unplugged.
ive done a few prado grande where ive converted the rear air bags to a simple coil setup and wacked an old man emu suspension kit in there
ive done a few prado grande where ive converted the rear air bags to a simple coil setup and wacked an old man emu suspension kit in there
Re: Prado 120 Grande Rear Shocks - Replacement
Yep just unplug them. You can still play with the switch if you want, it just won't do anything.
Who is online
Users browsing this forum: No registered users and 1 guest