want to put ln106 disk and callipers onto yn65 how to do it

[bundy4x4]

want to know what is the steps to change the disk and callipers on yn65 hilux is there a special way of doing them and what is the easiest way of doing them

can someone give me step by step on how to remove the disks

is there any adjustment on the master cylinder am using JB1879 on the standard booster yn65 hilux

[DUDELUX]

I put the 106 vented rotors and bigger calipers onto my LN65 Lux a couple of years ago.
The 106 rotors use the same wheel bearings as my old solid rotors, and bolted straight on, calipers bolted on with the only modification being the brake backing plate needed a trim so the larger calipers would bolt up flush and tight.

I also fitted an 80 series master cyl and booster, and that needed a bit of fiddling to get it fitted right and working right.

[bundy4x4]

is there a special way of changing them want to know what is the easiest way doing it can you give me step by step if you can

[DUDELUX]

No special way of changing them at all. Take off the old solid rotors and calipers, bolt on the new ones.

Just like changing a CV, but your replacing the brakes. Easy.

Same wheel bearings, same seals, same brake lines.