Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vit 3 spd auto in sierra
Vit 3 spd auto in sierra
Hey guys i have just bought a g16a with auto mated to it its going into a sierra just wondering were the kickdown cable hooks up? Is it to the carbie or the acc pedal? Or somewere else does yone have any pics of the motor end of the cable
Re: Vit 3 spd auto in sierra
Should connect somewhere near the carby end of the accel. cable.
Grow some balls.
That is all.
That is all.
Re: Vit 3 spd auto in sierra
ive not long put a g16a into my sierra with 3 speed auto and after pulling the motor from the vitara was unsure how i was going to mount there crazy setup.
i spoke to a few people that i knew had done the conversions and learnt that they shift and kick back by vacuum?
the cable setup factory on the vitara i had went from the auto to a box on right hand front guard on a rocker arrangement then with another cable going into the cab and onto the accel pedal like a t piece which then went out to the carby.this was gonna be too messy and not needed for my buggy
after asking around it seemed some people have this hole arrangement blanked off and done away with at the auto and the vehicle works perfectly, simply by plugging the auto up at the body. others have just ran the cable looped from the auto around into the cab and made up a bracket for it off the accel pedal. Which with some help of another forum member was the way i went. the cable only travels around 5mm or so and from what i was told is the TV (throttle valve) cable to promote a firmer shift and good line pressure. i am not saying what ive put here is right but it may help you as it did me.
Mines only been driven around the yard since the conversion but the shifting is awesome lol
i spoke to a few people that i knew had done the conversions and learnt that they shift and kick back by vacuum?
the cable setup factory on the vitara i had went from the auto to a box on right hand front guard on a rocker arrangement then with another cable going into the cab and onto the accel pedal like a t piece which then went out to the carby.this was gonna be too messy and not needed for my buggy
after asking around it seemed some people have this hole arrangement blanked off and done away with at the auto and the vehicle works perfectly, simply by plugging the auto up at the body. others have just ran the cable looped from the auto around into the cab and made up a bracket for it off the accel pedal. Which with some help of another forum member was the way i went. the cable only travels around 5mm or so and from what i was told is the TV (throttle valve) cable to promote a firmer shift and good line pressure. i am not saying what ive put here is right but it may help you as it did me.
Mines only been driven around the yard since the conversion but the shifting is awesome lol
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Re: Vit 3 spd auto in sierra
The three speed is a TH180 .. basically the same box as you would find in a HZ holden auto .. most of the tech is the same and there will be alot more of it for a kingswood than a vitara so might be worth a look there.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: Vit 3 spd auto in sierra
Mine is not connected to the motor at all and is zip tied up been working great for years nowlol
Who is online
Users browsing this forum: No registered users and 2 guests