I'm in the process of shaving my GU diff I run 4.6 diff ratios. I have a spare 4.1 diff centre. I would rather not pull the 4.6 centre out unit needed. So if I shave the diff using the 4.1 center as a guide do I need allow any extra space for the 4.6 gears if so how much ?
thanks Feral
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Crown wheel diameter
Crown wheel diameter
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
Re: Crown wheel diameter
There both the same diameter. There all 233mm or 260mm. It's all in the tooth count.
THOUGHT FOR THE DAY....
Re: Crown wheel diameter
Perfect thanks for that.
Let the shaving commence.
Let the shaving commence.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Ferals build www.outerlimits4x4.com/ftopic164570.php
Who is online
Users browsing this forum: No registered users and 39 guests