Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RWC on 80 series with 5 inch lift?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 7
Joined: Fri Jan 08, 2010 9:43 am
Location: Melbourne, VIC

RWC on 80 series with 5 inch lift?

Post by The Game »

Hey all,
I've got a 1992 HDJ80R with a 5 inch lift I'm looking to sell soon.
Does anyone know if I'll have any trouble getting the RWC with the lift in?
I'm in VIC.
Cheers
Posts: 14
Joined: Wed Sep 28, 2005 11:33 am
Location: Cairns FNQ

Re: RWC on 80 series with 5 inch lift?

Post by Bludge »

Has the mdifications been engneered (by a certified engineer)? If not it is unlikely to get a roadworthy.

Victoria has adopetd the VSB14 from NCOP11 Section LS Suspension and Steering V2 01Jan2011.
This can be read here http://www.vicroads.vic.gov.au/NR/rdonl ... hicles.pdf" onclick="window.open(this.href);return false; in particular section 13.
Posts: 7
Joined: Fri Jan 08, 2010 9:43 am
Location: Melbourne, VIC

Re: RWC on 80 series with 5 inch lift?

Post by The Game »

No engineer. I was told no engineers would look at it if it was over 2inch, but wasn't sure if it was the same for RWC.
Posts: 14
Joined: Wed Sep 28, 2005 11:33 am
Location: Cairns FNQ

Re: RWC on 80 series with 5 inch lift?

Post by Bludge »

The point of having the vehicle Engineered is to ensure that its is Roadworthy and meets the States regulatory rules. Technically your vehicle is un-roadworthy (does not meet the rules) and technically uninsured.

Now even if your insurance company does take your hard earned money, your policy will state that you are insured providing you meet State or Territory regulations. You may even get a repair done if in an accident. But in the case of injury to a person... well that is another story.

If you are going to sell, do it without a RWC or drop it back to 2", you will be able to sell the 5" lift, someone will buy it.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: RWC on 80 series with 5 inch lift?

Post by hulsty »

NO chance, swap in some 2'' springs and sell it with the 5'' springs in the back.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests