R150f or r151f behind v8 replacing g52

[bundy4x4]

Want to know what to use r150f or 151f gearbox behind 304 to replace the g52 it's going in an 85 yn65 single cab Hilux with a bench seat want to know as we'll does the gear stick has to move back or stays in the same spot I prefer not to move it back and what is the different between then and what model hilux do I have to get the gearbox from
I have the bellhouseing already from crs it for the g52 and they can redrill it for me and said I have to use the one with the short input shaft 160mm if 190mm I need to use there spacer

[Elmo]

Hey Bundy

Whether you get the R105 or the R151 is purely up to you as to what ratios you want in 1st and 2nd as that is the only difference.

R150f: 1st 3.830:1, 2nd 2.062:1, 3rd 1.436:1, 4th 1.00:1, 5th 0.838:1
R150f: 1st 4.313:1, 2nd 2.330:1, 3rd 1.436:1, 4th 1.00:1, 5th 0.836:1

I can't vouch for exactly how much it moves it back as it was not of interest to me as i needed a full custom tunnel anyway but it definitely is further back.
Also, depending on your adaptor plate your transfer case may also need to be top shift. Although i seriously doubt it. The R151f that I have is capable of having a Forward shift transfer case.

As far as what to get them out of the R151f came out of the Surf's with the 2lte motor and the R150f from the 2lt.