Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dana 44 front on eBay

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 297
Joined: Thu Jan 20, 2011 1:48 pm

Dana 44 front on eBay

Post by 91Mav »

G'day,

I know it's not tech but just stumbled over a Dana 44 front (and rear) diff on eBay http://m.ebay.com.au/itm/221490939931?nav=SEARCH" onclick="window.open(this.href);return false;

Old mate listed it under 'cherokie chasis' so it's hard to find (cheap/no offers). It's the commonly referred to (US) "Waggy" diff. It'd make a good swap for TJ's and XJ's etc due to the larger centre, 30 spl axles, spindles (wheel bearings) instead of unit bearings - means you can unlock the front hubs, and the 6 bolt hubs.

I'd get it myself but my TJ's already got an ARB and a HP D30 should last ok with only 33's.

I tried to post on Ausjeep too cos these are hard to come by but I can't remember my login :I
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: Dana 44 front on eBay

Post by GUtripper »

If it's from a quadratrack wagon, the front diff pumpkin will be on the right. TJ has the front pumpkin on the left.
You could get a front D44 from a NP208 ( ie non quad die) wagon, but the pumpkin is way to the left, making it a bitch to find the room to mount a coil spring perch, shock mount, control arm mounts etc.

Added to that, FSJ diffs ( from 4 doors) are about 58.75 inches wms-wms, about 2 and a bit inches narrower than TJ.
You could find a set of wide tracks from a Chief 2 door, but rare.

Stock ratios on most V8 waggys are 3.31, iirc.
My friends aren't holding me back..... I'm pulling 'em forward.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests