Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Camber Correction Kit

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 8
Joined: Mon Jun 18, 2012 5:12 pm
Location: South Australia

Camber Correction Kit

Post by scratched record »

Howdy

Had some work done and the "mechanic" reckons I need a camber correction kit. The symptons are that when I drive along on a flat road the steering tracks straight but if the road has camber to the left the steering wheel is between 10 to 20 degrees off centre to the right.

Is this something that can get adjusted through a wheel alignment or is this kit the way to go.

Cheers

ps it would help I've a 75 series ute
Top
User avatar
Emo
Posts: 4137
Joined: Thu Jan 15, 2004 12:46 pm
Location: Sunshine Coast

Re: Camber Correction Kit

Post by Emo »

Do you have a lift on the ute?
Top
Posts: 8
Joined: Mon Jun 18, 2012 5:12 pm
Location: South Australia

Re: Camber Correction Kit

Post by scratched record »

Not really, replaced the std suspension with ironman spring and monroe shocks and I think I may have got an extra 30 - 50mm, but that ws never measured though
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Re: Camber Correction Kit

Post by bru21 »

What vehicle?
Camber can only be adjusted on IFS, unless offset bearings are used.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 8
Joined: Mon Jun 18, 2012 5:12 pm
Location: South Australia

Re: Camber Correction Kit

Post by scratched record »

75 series ute
Top
Posts: 105
Joined: Sun Nov 18, 2007 7:12 pm
Location: Dont no

Re: Camber Correction Kit

Post by msjc38 »

I've seen these camber kits. But they run a smaller pivot bearing. All they do is make a small adjustment to compensate for a slightly bent diff housing.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests