Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
oil presure issues after install oil cooler
Moderators: toaddog, TWISTY, V8Patrol, Moderators
oil presure issues after install oil cooler
hi i have a 45 cruiser with 2h turbo motor a project i'v taken over was running fine with no oil cooler it just had a line going back on to its self at sandwich plate finally decided it was time to install oil cooler iv ran the lines mounted cooler but now i;m having oil pressure gauge not reading and engine shutting down within a minute of starting. iv checked oil level its fine got oil in cooler and lines i even just connected the two lines together and by past cooler if that would make a different's but didn't so i'm a bit lost on direction from here if anyone could help thanks
Re: oil presure issues after install oil cooler
undo one end of pipe and crank to ensure oil is going thru.
Who is online
Users browsing this forum: No registered users and 1 guest