Need to know legalities of using 5 to 10mm steel spacer plates on top of strut mounts to trim a vehicle.
This will equate to 10 to 20mm approx at wheel.
Some times a strut (Hilux, Ranger, Triton, 200 series etc) needs a trim after kit fitment.
I know large spacers are frowned on but what about 5 to 10mm to trim for dual bats, or other issues?
Baz
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Spacers on top of strut mounts as trim packer
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Spacers on top of strut mounts as trim packer
No idea on the legality ... but a small one done properly shouldn't be an issue ... I recall ARB using small packers on coils to level out fitment.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Re: Spacers on top of strut mounts as trim packer
Coil trim packers are ok. Its where you physically put a spacer between a strut and the body where its questionable.
Who is online
Users browsing this forum: No registered users and 0 guests