Plumbing a hydro handbrake with its own mini master cylinder to the rear callipers.
How and where do I tie it into the existing brake lines. I just want the handbrake to operate the existing rear callipers. In my head if it just join it to the rear lines, and operate the hand brake the fluid could just push back into the master cylinder and not actually to the rear callipers?
I have the handbrake actuation of the mini master cylinder all working etc, I just can’t figure the plumbing of the lines to ensure it works. Everything online is either electric actuation of a line locker or drift comp second set of callipers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hydro Handbrake
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Hydro Handbrake
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Re: Hydro Handbrake
I am assuming this is for offroad only? I have in my head that emergency braking systems ("handbrake") must be entirely mechanical and cable operated. Not sure where I read it, but i know I have read it in a vehicle standard somewhere.
Plan B
Fit a secondary calliper assembly to the rear. It wouldn't need to be a huge calliper assembly, just one that has enough to stop/slow the vehicle by the required amount. You can get some cable operated disc assemblies -IIRC some Subaru calipers had this several years ago.
Plan B
Fit a secondary calliper assembly to the rear. It wouldn't need to be a huge calliper assembly, just one that has enough to stop/slow the vehicle by the required amount. You can get some cable operated disc assemblies -IIRC some Subaru calipers had this several years ago.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Re: Hydro Handbrake
Just checked I didn’t accidentally post in the overlander forum.
Found what I was looking for, an ‘in-line hydro e-brake’ if you’re playing on google. Simples!
You do not have the required permissions to view the files attached to this post.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Who is online
Users browsing this forum: No registered users and 0 guests