Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux diff placement

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Hilux diff placement

Post by tomsoffroad »

Still building this bloody 3link in the back of my old surf and was wondering... Is there any reason why the diff has to sit straight up and down like it was with the leaves? The only reason I can think of is to lubricate the pinion bearings. If I can lay it back abit wouldn't it take abit of stress out of the uni?
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

yeah its best to rotate the pinion to point towards the transfer case
www.overkill4x4.com
ph 94766137
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

and to put a little bit more oil in the diff, because as you rotate it further away from the oils normal leavel, some bearing etc mightn't get the right amount of oil and sieze up
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

How do u put more oil in? Park truck with nose down steep hill?
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Drill and tap a new fill plug hole .. Its not all that hard ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

just mind where you drill, might his something important, LOL
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Preferably you would do this with the diff centre removed so you can remove any swarf tha the drill creates ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

to addextra oil i either park on a hill or poor it in through the diff breather hole
www.overkill4x4.com
ph 94766137
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

love_mud wrote:Preferably you would do this with the diff centre removed so you can remove any swarf tha the drill creates ..


is that why both my diffs make a grinding noise :lol: :lol:

oh well, it's a 40 - she'll live forever ;)
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Just like grandads axe ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
User avatar
Pal
Posts: 152
Joined: Sun Nov 10, 2002 7:14 pm
Location: Sydney

Re: Hilux diff placement

Post by Pal »

tomsoffroad wrote:Still building this bloody 3link in the back of my old surf and was wondering... Is there any reason why the diff has to sit straight up and down like it was with the leaves? The only reason I can think of is to lubricate the pinion bearings. If I can lay it back abit wouldn't it take abit of stress out of the uni?


Might throw tail shaft out of balance if uni joint flanges are not aligned to counter balance at each end.
Keep it simple
Top
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Was talking Supasurf the other night - nasty looking toy - he was telling me that unis work best when they are on a slight angle.
One other thing tha caught my eye is the fact that the rear uni is my first line of defence for the rear diff, has anyone sussed out a way to protect it?[/img][/url][/quote]
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

If you run a double cardan joint on the rear shaft the the diff should be angled up to point at the box.
If you run just single uni on both ends of the tailshaft the diff needs to be parralel to the box.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 6 guests