Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
You want the glass intact - use a stanley knife and cut away the rubber on the old rig.. and once all cut out.. slowly give it a push to see which end gives way.. then work from there.
then give windscreens obrien a call and get em to put the glass on the new rig. with new rubbers and seals??
dan give alan lock widscreens a call not sure of the number. he lives near woronora and is very cheap and really awesome at his job, i had a screen done by o'briens once and the frist time it rained it was like a waterfall in the cab of my lux they then came out a squirted black shit all around the seals
he did the screen in my 80, supply and fit was $190 very cheap for an 80 in my eyes....
). Then put it into my rig.
they then came out a squirted black shit all around the seals