I am looking to do a body lift to my feroza but am not sure on the best way to go about it... if anyone can help out or give me some instructions of some sort i would be much obliged.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Feroza Body Lift
Moderator: Tiny
Feroza Body Lift
Hey all
I am looking to do a body lift to my feroza but am not sure on the best way to go about it... if anyone can help out or give me some instructions of some sort i would be much obliged.
cheers
I am looking to do a body lift to my feroza but am not sure on the best way to go about it... if anyone can help out or give me some instructions of some sort i would be much obliged.
cheers
Travis
'96 SXII Feroza
'96 SXII Feroza
Matey,
I recently did a bodylift on a feroza and found it to be relatively simple. Check the Daihatsu FAQ, as there is some helpful tips here.
Check this link and you will find a good procedure that is useful because it tells you what bits you need and how to do the lift and it's easy to understand.
http://www.geocities.com/davefogwill/Fe ... ylift.html
My only advise would be to take your time, follow what it says to do in the procedure and make sure you shop around until you get high tensile metric fine thread bolts for the front and rear. To remove the rear stud, screw on a 17mm nut followed by a 15mm nut and unwind the 17mm nut to remove the stud. If any other body bolts give you a hassle and angle grinder works nicely.
Good luck
Jimmy L
I recently did a bodylift on a feroza and found it to be relatively simple. Check the Daihatsu FAQ, as there is some helpful tips here.
Check this link and you will find a good procedure that is useful because it tells you what bits you need and how to do the lift and it's easy to understand.
http://www.geocities.com/davefogwill/Fe ... ylift.html
My only advise would be to take your time, follow what it says to do in the procedure and make sure you shop around until you get high tensile metric fine thread bolts for the front and rear. To remove the rear stud, screw on a 17mm nut followed by a 15mm nut and unwind the 17mm nut to remove the stud. If any other body bolts give you a hassle and angle grinder works nicely.
Good luck
Jimmy L
89 Narrow CracK Feroza EL- X
2001 NM Pajero Exceed 3.5V6
Coming Soon 2010 Defender 90
2001 NM Pajero Exceed 3.5V6
Coming Soon 2010 Defender 90
Who is online
Users browsing this forum: No registered users and 1 guest