Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
snorkel to gas
Moderators: toaddog, TWISTY, V8Patrol, Moderators
snorkel to gas
want to know how to set up a snorkel unit to my 308 patrol which is running on deul fuel, has air cleaner off the end of the mixer any ideas.
I've got an Impco straight LPG setup on the chev in my FJ40 and want to set up a snorkel soon too.
What I am thinking of doing is getting an adaptor for a quadrajet to mount the 425 at 90degrees off the top of the carb, and run duel fuel again. Should be easy to run a air cleaner box with outlet pointing to the side of the truck with the snorkel.
They sell them in the states but I haven't seen them in Aust before.
http://www.propaneguy.com/Parts.html
Good performance, easy to run a snorkel off an airfilter cover around the 425, and should look tough in the engine bay.
If that works I'm thinking about doing a dual carb/dual 425 mixer setup in preparation for a bigger motor down the track
What I am thinking of doing is getting an adaptor for a quadrajet to mount the 425 at 90degrees off the top of the carb, and run duel fuel again. Should be easy to run a air cleaner box with outlet pointing to the side of the truck with the snorkel.
They sell them in the states but I haven't seen them in Aust before.
http://www.propaneguy.com/Parts.html
Good performance, easy to run a snorkel off an airfilter cover around the 425, and should look tough in the engine bay.
If that works I'm thinking about doing a dual carb/dual 425 mixer setup in preparation for a bigger motor down the track
snorkel set up
the mixer appears to be the long type with a round air filter attached, has a impco convertor am thinking about changing to a better system in the near future any ideas. Thanks Boxhead.
Re: snorkel set up
Boxhead wrote:the mixer appears to be the long type with a round air filter attached, has a impco convertor am thinking about changing to a better system in the near future any ideas. Thanks Boxhead.
an impco 300a on the end of the aluminium snorkle? air filter on the angle on the end? maybe a impco 425 will be more user friendly, with better economy to boot
Who is online
Users browsing this forum: No registered users and 13 guests