hey guys just a question for anyone out there with some knowledge on rodeo's i have a 1998 4X2 v6 rodeo (so its on a 4wd chassis) and i was wondering if anyone knows how to drop them i wanna lower it about 3 inchs or so.
that would be awwsome if someone could fill me in on this!!
cheers
Darren
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4wd boys will hate me..need info on lowering a 4X2 98v6rodeo
Moderator: Moderators
You are right, lowering something for us is sacrelege! 
Cant help myself but do a search on the net. Heres something I found:
http://www.cardomain.com/memberpage/352473/4
Looks like fitting a block between the leafs and the axle is the go. Hopefully not the only way, looks a bit dodgey to me. Dunno about the front though...
Noel
Cant help myself but do a search on the net. Heres something I found:
http://www.cardomain.com/memberpage/352473/4
Looks like fitting a block between the leafs and the axle is the go. Hopefully not the only way, looks a bit dodgey to me. Dunno about the front though...
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
G'day,
Most suspension places should be able to supply you with lowering blocks for the back. Although I don't think too many are made in 3 inch! 1.5 and 2 are common.
As for the front, the Castlemaine Rod Shop makes 2 inch drop spindles for Rodeos. These lower the front without reducing suspension travel.
I hope this helps
-Stuart
Most suspension places should be able to supply you with lowering blocks for the back. Although I don't think too many are made in 3 inch! 1.5 and 2 are common.
As for the front, the Castlemaine Rod Shop makes 2 inch drop spindles for Rodeos. These lower the front without reducing suspension travel.
I hope this helps
-Stuart
i will get a pick before i lift it. it is a 93 2wd with a 2002 model front end, high gloss white with chrome fittings and 18inch wheels.
the lowering kit consits of lower profile front bump stops, 4 shocks, and rear blocks. i got it from burnin customs.
www.burnincustoms.com
NICK
the lowering kit consits of lower profile front bump stops, 4 shocks, and rear blocks. i got it from burnin customs.
www.burnincustoms.com
NICK
TECH SCREW GURU
Who is online
Users browsing this forum: No registered users and 4 guests