Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

body lift

Post by planb »

can anyone tell me how many body mounts there are in a gq wagon ?

Are there only two fine thread captive nuts or more ?

thanks

much appreciated

:)
Top
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Re: body lift

Post by GQAndrew »

planb wrote:can anyone tell me how many body mounts there are in a gq wagon ?

Are there only two fine thread captive nuts or more ?

thanks

much appreciated

:)


I believe there are 10 in a LWB, and 8 in a SWB. There are some instructions floating around on a page somewhere but cant remember where.
Top
Posts: 159
Joined: Tue Apr 27, 2004 12:15 pm
Location: WA

Post by GQAndrew »

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=18024&highlight=body+lift
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

10 lwb.

2 rear most ones have a captive nut in floor channel.
Acessible from inside rear floor under rubber grommet.
Use a lot of heat on this nut to loosen hitemp loctite.

Bazzle :P
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Re: body lift

Post by Daisy »

planb wrote:can anyone tell me how many body mounts there are in a gq wagon ?

Are there only two fine thread captive nuts or more ?

thanks

much appreciated

:)


8 bolts and nuts for the front part of a lwb with 2 bolts screwed into welded nuts in the rear (can be a bastard to remove if you're not careful)

TOM
Top
User avatar
WXC
Posts: 120
Joined: Fri Jan 16, 2004 4:51 pm
Location: Lalor Park NSW.

jygdt

Post by WXC »

If the captive nuts break loose, (like they did on mine!!! :x ) you can cut the head off the rear 2 bolts from underneath with an angle grinder, and then knock em' through with a hammer!!! just be carefull with the grinder near fuel tanks and fuel lines!!! :twisted:

ENJOY!!! :twisted:

And yes there are 10 mounts! just in case!!! :D
80series SAHARA, 3" lift, 33" Cooper STT's, F & R Lockers, (they're still cheating though)
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

what are you heating the rear captive bolts with? oxy :D :?:
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I use a gas torch thru hole inside, oxy will do too.

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest