Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Snorkel leak

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Snorkel leak

Post by MQ080 »

Is there a test for the 79 series 1HZ factory fitted snorkel in regards to air leaks? ...apart from running the engine in reverse :D
Top
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Contact:
Contact MYTTUF

Post by MYTTUF »

Stop the air flow going in with a rag or similiar and if it's leaking it will suck-in air in the leak in the engine bay and you should hear this sucking. If there is no leak the motor will strugglke to run.
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

Pull said snorkle off truck

Put silicone on EVERY join you can see, then try the test again.

They are NOT a wading snorkle, theyre only a dust snorkle :roll:

frucking useless concept if you ask me
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

ferrit wrote:
They are NOT a wading snorkle, theyre only a dust snorkle :roll:



Yeah i thought this would be the case, but they are still better than nothing.Dumb genuine parts :x
Top
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Contact:
Contact MUSS

Post by MUSS »

dont use silicon use sicaflex (marine grade) this is way better and will not separate from the plastic under vibration or at high and low temps :armsup:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

spray pure oxygen or no2 around all the joins and if the engine revs increase then there is leak.
______________________
PRAISE THE LIFTED
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

did Len P give you the 79!! no way!


like the others have already said, the factory snorkels are not waterproof and they are pretty difficult to get waterproof. lots of sikaflex or just don't go into deep water.
Free air locker to the first 20 callers!
Top
Posts: 303
Joined: Tue Aug 05, 2003 11:27 am
Location: Castle Hill

Post by Monty »

Go Lenny P
Do not have sexual relations with your father's sister; she is your father's close relative
Leviticus 18:12
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 77 guests