Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

bushes

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

bushes

Post by RB zook »

i need new bushes in my rear control arm its chewed to farrk


shouls i get standard suzuki ones?

i dont want them to restrict articultion

can any coily owner out there recomend some bushes
cheers
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

repco can supply rubber bushes to suit, don't think suzuki sell bushes without the arm , superpro urethane (fulcrum) from supercheap auto are softer then other urethane brands.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

A1 Said Supa Roo bushes from Pedders were flexy...

or poly flex bushes from ORI if they fit.

HRZOOK
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

big balls off road sell ajustable bushes for lifted coilies apparantly they help it handle better. but are also made for your application
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

i just bought some bushes for mine from suzuki, they are the ones like the chassis end of the arms have in them, i was going to put them in on the diff end but they might be too stiff. dunno.
Lester
96 SJ80V - it has coils from the factory!
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Lobby ORI to make poly flex fit coillies

check em at http://www.offroadindustries.com/suspen ... lyflex.htm

They may have another application that fits coillies

$35 a piece cheap...... :D

Does anyone know the inside diameter of the trailing arm bush location as the poly flex are 50mm outside diameter and made to any width

HRZOOK
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

nelligen what bushes did you use when you did your lift?
Top
Posts: 426
Joined: Sat Jan 31, 2004 11:28 am
Location: batemans bay

Post by xtreem »

He used the fulcrum (super pro) bushes from super cheap and drilled holes through them to help them flex. And they work very well, No flexing drama's even without the holes drilled.
SUZUKI Remember anything else is a compromise.
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

HRZOOK , The bushe sizes are ---- chassis end 52mm OD 12mm ID x65mm wide . diff end 51.7 mm OD 12mm ID x 60mm wide. Muppet_man67 ,I used super pro with the castor adj bushes on the front, on the rear end I kept the originals. I find the super pro bushes flex ok,
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

did you find nelligen that the caster bushes limit flex compaired to standard bushes.

also do you chew standard bushes at the diff end?
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

castor bushes suck ass

ask suzukisam
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

RB zook wrote:did you find nelligen that the caster bushes limit flex compaired to standard bushes.

also do you chew standard bushes at the diff end?
I think they may limit flex a little , but there's urethane and there's urethane, Suzukisam (Lester) used the yellow bushes from suzisport and said there hard as rock and had trouble drilling holes in them , I drilled holes in my super pro bushes with no effort at all , soft as sh t. I haven't chewed out any bushes yet .
Top
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

HRZOOK wrote:castor bushes suck ass

ask suzukisam
they flexed good on A1MAV's sierra , Best flex photo's Ive seen here for a while.
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

nelligen wrote:
HRZOOK wrote:castor bushes suck ass

ask suzukisam
they flexed good on A1MAV's sierra , Best flex photo's Ive seen here for a while.


was takin bout 4way bushes sorry

supa pro(roo) good

4way bad

HRZOOK :D
Top
Posts: 101
Joined: Sat May 22, 2004 6:46 pm

Post by suzukisam »

nelligen wrote:HRZOOK , The bushe sizes are ---- chassis end 52mm OD 12mm ID x65mm wide . diff end 51.7 mm OD 12mm ID x 60mm wide. Muppet_man67 ,I used super pro with the castor adj bushes on the front, on the rear end I kept the originals. I find the super pro bushes flex ok,


thanks for that nelligan, i bought the wrong bushes i see and, no they won't fit (just been looking close with the calipers)

i'll see if i can get tthe right ones from suzuki or it might be some creative design coming...
Lester
96 SJ80V - it has coils from the factory!
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

This mob has supa pro bushes as well as adjustable panhard rods for coillies. http://www.whiteline.com.au

but I still think all the coilly owners should ring http://www.offroadindustries.com and ask about polyflex bushes enuff enquiries and they may make em .

Just a thought

HRZOOK
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 21 guests