Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheapest lock rite retailer?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Cheapest lock rite retailer?

Post by 2car »

Who (in Australia) has the best prices for lock-rite lockers? '78 Cruiser diff to be specific.

Ta

Ben
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

import it its heaps cheaper i imported one for a zook and it cost $250 all up with two weeks wait. that was a powertrax one.
DRIVE IT!!!!!
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

yld04b wrote:import it its heaps cheaper i imported one for a zook and it cost $250 all up with two weeks wait. that was a powertrax one.


From the US? Who did you buy it from?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 1175
Joined: Mon Dec 09, 2002 6:25 pm
Location: sydney

Re: Cheapest lock rite retailer?

Post by XXXL80 »

2car wrote:Who (in Australia) has the best prices for lock-rite lockers? '78 Cruiser diff to be specific.

Ta

Ben


try diff trans @ green acre. very good prices on both lock rite and detroit
my 80 is gone :(

check out my new website:

http://members.optusnet.com.au/pearsallk/index.html
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Re: Cheapest lock rite retailer?

Post by 2car »

XXXL80 wrote:
2car wrote:Who (in Australia) has the best prices for lock-rite lockers? '78 Cruiser diff to be specific.

Ta

Ben


try diff trans @ green acre. very good prices on both lock rite and detroit


I rang 'em. They only stock Detriot lockers.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

the one yld04b was talking 'bout is a zook one from rocky road outfitters in the states, just priced it was $250AUS not including shipping, but he reckoned less than $30!

tried emailing em, but their mailbox is full :cry:

http://www.rocky-road.com/index2.html their yota section is under construction tho, so u'll need to email em too. lemme know if u get thru
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

stumped wrote:the one yld04b was talking 'bout is a zook one from rocky road outfitters in the states, just priced it was $250AUS not including shipping, but he reckoned less than $30!

tried emailing em, but their mailbox is full :cry:

http://www.rocky-road.com/index2.html their yota section is under construction tho, so u'll need to email em too. lemme know if u get thru


Yeah I sent them an email too. I may give them a call tonight.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 1175
Joined: Mon Dec 09, 2002 6:25 pm
Location: sydney

Re: Cheapest lock rite retailer?

Post by XXXL80 »

2car wrote:
XXXL80 wrote:
2car wrote:Who (in Australia) has the best prices for lock-rite lockers? '78 Cruiser diff to be specific.

Ta

Ben


try diff trans @ green acre. very good prices on both lock rite and detroit


I rang 'em. They only stock Detriot lockers.


no worries.. thought they did the lock rite :oops:
my 80 is gone :(

check out my new website:

http://members.optusnet.com.au/pearsallk/index.html
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

2car wrote:
stumped wrote:the one yld04b was talking 'bout is a zook one from rocky road outfitters in the states, just priced it was $250AUS not including shipping, but he reckoned less than $30!

tried emailing em, but their mailbox is full :cry:

http://www.rocky-road.com/index2.html their yota section is under construction tho, so u'll need to email em too. lemme know if u get thru


Yeah I sent them an email too. I may give them a call tonight.


US$275 delivered via surface mail. Roughly AU$400. Much better than the $646 advertised locally. Can you say "Price gouge"?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

hey ben, did u give em a call? if i can get a locker that cheap a mate and i are gonna be keen, maybe we can sort something out and get stuff sent out in one shipment...
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

stumped wrote:hey ben, did u give em a call? if i can get a locker that cheap a mate and i are gonna be keen, maybe we can sort something out and get stuff sent out in one shipment...


I rang them last night and they had two in stock. Already ordered it :?. I'm 500km from you so it's probably not worth splitting the shipping. It's only about $30 surface mail.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Post by Nev62 »

Hmmm, wounder if they have any for a 93 Courier??
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

just quickly, how hard is it to install a lockrite? could i do it, or is it a bit harder than that? i have a reasonable level of skill with tools...
:cool:
indubitably
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

De-lux wrote:just quickly, how hard is it to install a lockrite? could i do it, or is it a bit harder than that? i have a reasonable level of skill with tools...
:cool:


if you can set up a diff properly you can install a lockrite , by properly i mean back lash, tooth contact and bearing preload.
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

hahahahha... so no, i won't be able to install a lockrite...

i know how to service my car, and i did my own body lift, but thats where i draw the line. i was hoping it was as easy as bolting something in
indubitably
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

stressed wrote:
De-lux wrote:just quickly, how hard is it to install a lockrite? could i do it, or is it a bit harder than that? i have a reasonable level of skill with tools...
:cool:


if you can set up a diff properly you can install a lockrite , by properly i mean back lash, tooth contact and bearing preload.


you dont need to do any of this when installing a lock-rite if you mark all adjusting nuts/bolts and put it back together in the same way.

the lock-rite replaces your spider gears so you just need to fit it inside carrier and put it back together, they come with instructions, simple.

steve
DRIVE IT!!!!!
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

yld04b wrote:
stressed wrote:
De-lux wrote:just quickly, how hard is it to install a lockrite? could i do it, or is it a bit harder than that? i have a reasonable level of skill with tools...
:cool:


if you can set up a diff properly you can install a lockrite , by properly i mean back lash, tooth contact and bearing preload.


you dont need to do any of this when installing a lock-rite if you mark all adjusting nuts/bolts and put it back together in the same way.

the lock-rite replaces your spider gears so you just need to fit it inside carrier and put it back together, they come with instructions, simple.

steve


but if he chooses to change his bearings at the same time he will need to reset everything , if not than you are correct , maybe i should have explained it better as i did on the other thread (backlash for mini spool) :oops:
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

Beware of the customs dept, I just imported a rockcrawler gear set from the US , customs hit me with 16% on the price including postage then 10% gst on the total, the gear set was $550 us and ended up costing $1070 aust.
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

nelligen wrote:Beware of the customs dept, I just imported a rockcrawler gear set from the US , customs hit me with 16% on the price including postage then 10% gst on the total, the gear set was $550 us and ended up costing $1070 aust.


Rodger that. Did you still end up saving money?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 160
Joined: Thu Feb 19, 2004 9:32 pm
Location: Nelligen via Batemans Bay

Post by nelligen »

2car wrote:
nelligen wrote:Beware of the customs dept, I just imported a rockcrawler gear set from the US , customs hit me with 16% on the price including postage then 10% gst on the total, the gear set was $550 us and ended up costing $1070 aust.


Rodger that. Did you still end up saving money?
Yea ,saved about $100 and got a few extra's you don't get here with the rockhoppers ( counter shaft , needle bearings & gaskets )
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Well it finally arrived. Took about 5.5 months via surface mail. Didn't have to pay any GST or duty.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

loker

Post by Mechman »

five and a half months???????????
ohhhhh shite... it really didnt look that deep!
Posts: 91
Joined: Sun Sep 12, 2004 11:31 am
Location: brisbane north

Post by low40 »

let us know how it goes with the lock rite in the front
cheers
no more forty now have a 80
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: loker

Post by Shadow »

Mechman wrote:five and a half months???????????


what he said

did it really take that long LOL
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

got my detroit ez-locker from www.roadlessgear.com for the zook, took less than 3 weeks to get here, and cost $360ea compared to $600 or so!!!
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 285
Joined: Sun Aug 15, 2004 9:31 am
Location: Sydney

Post by dibbz »

let us know how it goes with the lock rite in the front
cheers


I chucked one in the front of my 60 a couple of months ago.

Overall its pretty good, I say this first.. :)

If your accellerating suddenly or/and changing gears, it will bite and your steering gets pulled left momentarily (in my case anyway). I was like WTF at first, easily accounted for in driving style. I drive like its sunday every day anyway.

I found at the right speed I got the odd bounce with the small movement in my steering.. just had to speed up/slow down a little did not concern me.

At one stage I had my steering almost locked and i found i couldnt move the steering at all, and had to back up a little.. a feeling I wasnt used to although I was coming out of a creek up a mound to get around another car.. not a worry, just backed up a little.

I think if your not doing some hard rocks your probably not going to do your CV in as it seems to happen, I think if your planning going over some mad granite just go an air locker - I believe you can get air lockers from the US also.

They say you can install it but you want to be real sure your diff is within tolerances, and on a 78 I am sure its gonna be near new but my ol 60 needed shims. The diff lapper guy said the diff had been reconed once before and probbaly not done very well (front diff also, how much work could it get day to day)..

Theres another thread here where someone lost the rear diff and just gave up driving home with only the front, too painful.

So the real price it cost me was $595 from 4wdsystems + $650 (mechanic and diff lapper.. got some other small work done also by the mechanic aswell...). Probably best do do as much as you can youself if you can.

Hope this helps.
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Re: loker

Post by 2car »

Shadow wrote:
Mechman wrote:five and a half months???????????


what he said

did it really take that long LOL


Yeah! Looking at the postage mark, they didn't post it until 6 weeks after the order. I rang Rocky Road a couple of times - man, they got some dopey people workin the phones there.

Did'nt pay any tax or duty though, and I didn't need it straight away. So not dramas. Less than 400 Oz pesos to my door.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm

Post by STIKA »

dibbz wrote:
let us know how it goes with the lock rite in the front
cheers


I chucked one in the front of my 60 a couple of months ago.

Overall its pretty good, I say this first.. :)

If your accellerating suddenly or/and changing gears, it will bite and your steering gets pulled left momentarily (in my case anyway). I was like WTF at first, easily accounted for in driving style. I drive like its sunday every day anyway.

I found at the right speed I got the odd bounce with the small movement in my steering.. just had to speed up/slow down a little did not concern me.

At one stage I had my steering almost locked and i found i couldnt move the steering at all, and had to back up a little.. a feeling I wasnt used to although I was coming out of a creek up a mound to get around another car.. not a worry, just backed up a little.

I think if your not doing some hard rocks your probably not going to do your CV in as it seems to happen, I think if your planning going over some mad granite just go an air locker - I believe you can get air lockers from the US also.

They say you can install it but you want to be real sure your diff is within tolerances, and on a 78 I am sure its gonna be near new but my ol 60 needed shims. The diff lapper guy said the diff had been reconed once before and probbaly not done very well (front diff also, how much work could it get day to day)..

Theres another thread here where someone lost the rear diff and just gave up driving home with only the front, too painful.

So the real price it cost me was $595 from 4wdsystems + $650 (mechanic and diff lapper.. got some other small work done also by the mechanic aswell...). Probably best do do as much as you can youself if you can.

Hope this helps.


Why get an air locker from the US, when they are made here :?:
Are they that much cheaper there :?:
Supported By
Milanco
Phones N Alarms
Buds Customs
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

STIKA wrote:Why get an air locker from the US, when they are made here :?:
Are they that much cheaper there :?:


airlocker is a bit cheaper, from roadless it's 'bout AUD$950 instead of 1200 or 1300, but once u factor in freight and customs/tax it's not really worth it. might be cheaper sights out there tho

but for the auto locker, we saved at least $200
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 167
Joined: Sun Mar 28, 2004 7:32 pm
Location: Townsville

Post by Toos »

Iknow what you mean about the people on the phone it was like I wasn't speaking english. But the prices are to good not to put up with them.
4 Pot Screama
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests