Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tyres for stock NG

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 3
Joined: Fri Apr 30, 2004 4:34 pm
Location: Sydney

Tyres for stock NG

Post by Kirk »

:?: Hey there. Am new owner of 91 NG LWB. Have been offered 275/75/16 AT with rims for nix. Anyone know if will they fit under standard height?
91 NG LWB, TJM Alloy Bull Bar, Lots of Lights, 2" susp lift, Rockcraler shocks springs and bars, 32" rubber and many bling factory electrical extras.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

That's over 32" - you won't get that under a standard NG. Even a decent suspension lift may cause rubbing, you'll probably need a body lift and suspension lift to clear them.

(or you could just let them rub. :twisted: )

Scott
Top
Posts: 3
Joined: Fri Apr 30, 2004 4:34 pm
Location: Sydney

Post by Kirk »

My calculations came out at just over 31 inch (31.16 inchs) x 11 (10.83 inches) :?
91 NG LWB, TJM Alloy Bull Bar, Lots of Lights, 2" susp lift, Rockcraler shocks springs and bars, 32" rubber and many bling factory electrical extras.
Top
Posts: 703
Joined: Sun Apr 20, 2003 12:12 pm
Location: Brisbane southside

RE

Post by Grantw »

275/75/16 is the same as 32.2/11/16

Not a great option for a standard height NG... Go for 2" lift first..
09 Mitsu Evo X Mr
09 Suzuki Swift
09 VW 190kw Tiguan
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Kirk

Allow me to suggest you buy a new calculator, or stop relying on Microsoft products to do your maths for you! :)

And welcome to the fold.

Scott
Top
Posts: 3
Joined: Fri Apr 30, 2004 4:34 pm
Location: Sydney

Post by Kirk »

Cheers guys, thanks for your help..... I can't pass up FREE rims and tyres, so I will garage them till the lift goes in next month (after the pay cheque!) :roll:
91 NG LWB, TJM Alloy Bull Bar, Lots of Lights, 2" susp lift, Rockcraler shocks springs and bars, 32" rubber and many bling factory electrical extras.
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yeah I'd be going with a 2" s/l to fit 32"s on a Gen 1 Paj.
I just luv my "clacker Jabber"
Top
Posts: 41
Joined: Wed Jan 28, 2004 11:11 pm

Post by JMeager »

Hey NJ SWB, I used a Microsoft calculator and I can vouch at it coming to 32.2 as well, so Microsoft can actually manage to make a good calculator!

Jeff
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 8 guests