Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheels and gear ratios.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Wheels and gear ratios.

Post by huntn »

OK im sure this has been on before but nobody mentioned the gear ratios needed to turn 35s, so if i was to turn 35s and ran 5.12 diff ratios would i be back to about the standard gearing or would i still need to get some series 3 rock hoppers. Even then what revs would my 1.3 5 speed be doing to sit on 100km/h. Cheers guys.
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

General Tech Sticky Thread (Above this one)
yeshemesh
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=12442

I refuse to be a search nazi so I won't say it










Search Noob!!!!
yeshemesh
Top
Posts: 115
Joined: Tue Oct 21, 2003 5:27 pm
Location: Sydney

Post by No Idea »

i've got 35's and 5.12s and the speedo seems to still be accurate - just can't get to the top speed anymore - too much wind resistance.

I sit on the M2 at about 100 on the speedo (3500rpm) and am with the other traffic.
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

No idea, do you have rock hoppers in, or do u have no idea of that? U also have a PM.
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

No idea, do you have rock hoppers in, or do u have no idea of that? U also have a PM.
Top
Posts: 164
Joined: Sun May 11, 2003 7:18 pm
Location: Melbourne

Post by EARSEZOOK »

you can now buy 5.83 ratios from the states which should solve all your problems.
PROCOMP -> What more can I say?
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

I think you also need to keep in mind that if 5:12's return your speedo to being correct your still turning a hell of a lot more tyre than a 27.

So you might have correctly adjusted standard gearing with 35's but its not gunna like 5th gear and have no more reduction in low than standard (Which isn't very low). I think the moneys better spent on a rockhopper.

My 2c + GSt
yeshemesh
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

What about i run 5.12 and rock hoppers series 1 or 3? Then i'd be able to use fifth and have a very good low range, but would it still be daily driveable?
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

yes it would be daily driverable but it would be in the shed all the time broken ;) 35's=to big for zuk stuff

plus it would be a big piece of shit off road u would have to lift it to tall to clear the tires(daily driven u cant really hack away all the panels) stick with 31' or 33's it will be more capable an not broke asmuch
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 437
Joined: Mon Nov 24, 2003 4:26 pm
Location: back in the bush ;)

Post by germo »

redzook wrote:
(daily driven u cant really hack away all the panels)


oh but you can try! :lol:
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

huntn wrote:The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?


i just noticed u r in melb
so u will mostly be in mud yeh?
id say cv's will be your first thing to go

but it shouldnt be to bad i dont think as the other melb dudes are runnin 34's without breakage
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

huntn wrote:The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?


Don't listen to Tim, he thinks that 33's are big and that you break stuff driving on to other peoples tyres.

Steve
yeshemesh
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

very minimal rubbage? what suspension setup do u have? it must be either real tall or no flex :lol:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

bigsteve wrote:
huntn wrote:The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?


Don't listen to Tim, he thinks that 33's are big and that you break stuff driving on to other peoples tyres.

Steve
read my unedited post ubove yours ;)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

huntn wrote:The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?


PICS !!!!

umm , wat will you break ???
rear axles , clutch , CV,s , diff centres , gear box !!!!!!
(all depends how you treat it) :D

5th gear will be OK , it will never get used !!! :rofl:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

redzook wrote:
bigsteve wrote:
huntn wrote:The 35s are under it now and fit easy with very very minimal angle grinder useage! just need my ratios right. So what do you think will break redzook?


Don't listen to Tim, he thinks that 33's are big and that you break stuff driving on to other peoples tyres.

Steve
read my unedited post ubove yours ;)



heheheh 5:29pm a piece :)
yeshemesh
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest