Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lockers...
The spling count and size of the Stub axle on the CV is the same size on 1.0 and 1.3 litre diffs .. not sure about the inner axle .. from memory it is a 22 spline 0.97 inch axle shaft..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
G’day To All
Obviously my post has stirred some interest given other posts and the PM sent
To make it clear, the traction control system we are testing (using) is not a haltech etc. It is a system developed by Sam Overton and the guys at Haultech Engineering. As noted in other posts it is similar to the units used on Sam’s and his mates buggys. Check out previous issues of 4wd Monthly I think the year book that voted the device the best tech or after market electronic device etc. It also had brief write up’s in the articles that featured Sam’s Mog Rover and Adrian’s at the time red hilux.
I do not work for M&M so to speak, I am importing products under the ‘Aussie Boys Toys’ banner which is the Oz agent for:
Spidertrax - (this give us good deals on Calmini Products are the sponsor and sell Spidertrax products and they also have a similar arrangement with Rock Road Outfitters aswell,
All Pro Offroad
Marlin Crawler (not yet fully exclusive, hopefully soon to be)
AOR industries and we are waiting to confirm something with Currie Enterprises.
The products imported are sold through M&M and given the way things are going we will be making Aussie Boys Toys a division of M&M. Please note that all these products are also available through Overkill Engineering.
Cheers
Obviously my post has stirred some interest given other posts and the PM sent
To make it clear, the traction control system we are testing (using) is not a haltech etc. It is a system developed by Sam Overton and the guys at Haultech Engineering. As noted in other posts it is similar to the units used on Sam’s and his mates buggys. Check out previous issues of 4wd Monthly I think the year book that voted the device the best tech or after market electronic device etc. It also had brief write up’s in the articles that featured Sam’s Mog Rover and Adrian’s at the time red hilux.
I do not work for M&M so to speak, I am importing products under the ‘Aussie Boys Toys’ banner which is the Oz agent for:
Spidertrax - (this give us good deals on Calmini Products are the sponsor and sell Spidertrax products and they also have a similar arrangement with Rock Road Outfitters aswell,
All Pro Offroad
Marlin Crawler (not yet fully exclusive, hopefully soon to be)
AOR industries and we are waiting to confirm something with Currie Enterprises.
The products imported are sold through M&M and given the way things are going we will be making Aussie Boys Toys a division of M&M. Please note that all these products are also available through Overkill Engineering.
Cheers
Who is online
Users browsing this forum: No registered users and 0 guests