Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2F or 3F in 76 Toyota

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

2F or 3F in 76 Toyota

Post by Reddo »

Hey everyone

Okay heres the question. Today there was an add in the local rag and it reads like this,

Land Cruiser
76, with 85 motor, good mech, as is or will wreck, $800.

The problem is I wanted to know what motor this is, and I suggested that it might be the 2F. To this he said it was either the 2F or 3F, and he can to the conclusion that it was the 3F.
I wasn’t aware there was a 3F ever made. The details he supplied were that it was the Petrol 6 with a 350 holly carbie set up. And my question is which engine do you think it is, because when I asked weather the g-box was 4 or a 5 speed, he said a 4.


James
Nice gq swb ute chop with a huffer for the good times
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

2f will have 2f on the top off the rocker cover
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

t

Post by DIRTY ROCK STAR »

mate the 3F was in the 60 series to my knowledge.

the early 60s had a 2F in the petrols, then the later had a 3F.

im pretty sure on this.
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

2Fs werent know for reving freely thats why the 3Fs were designed with a shorter stroke, all they did was put a shorter stroke in a 2F and came in at the 4.0L mark. (2Fs being 4.2L) raising the torque curve to higher RPM.

id say its a 3F as it was made in 85. 3Fs had fuel injection too. but i think the earlier ones had a carb.

gearboxs can be mixed and matched so thats not really any help. he may of just picked up a newer engine and did a swap which id say is the case.

MaccA
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Look thanks very much for your help fellas, :D

Having a look at it tomorrow, maybe if its still there :cool:



James
Nice gq swb ute chop with a huffer for the good times
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

BTW, do they still drink like an alco, or are they better on fuel?




James
Nice gq swb ute chop with a huffer for the good times
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Post by MUSS »

chuck a HYCLONE on the bugger :rofl: :finger:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Post by MUSS »

chuck a HYCLONE on the bugger :rofl: :finger:
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Posts: 744
Joined: Tue Dec 09, 2003 10:47 am
Location: Townsville.

Post by Fieldsy »

Reddo wrote:BTW, do they still drink like an alco, or are they better on fuel?


a bit better but still not good

I thought all 3f's were carby here in OZ the yanks got the fuel injection
Team TAGATI

[quote="hottiemonster"]there seems to be a few people with quotes of mine in their sig, i guess i am just popular :D or just say some stupid things sometimes :lol:[/quote]
Posts: 65
Joined: Mon May 31, 2004 2:24 pm

Post by MacroP »

Fieldsy wrote:
Reddo wrote:BTW, do they still drink like an alco, or are they better on fuel?


a bit better but still not good

I thought all 3f's were carby here in OZ the yanks got the fuel injection


Early 80 series' had the 3F-E for a short while before the 1FZ was released.
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Fieldsy wrote:
Reddo wrote:BTW, do they still drink like an alco, or are they better on fuel?


a bit better but still not good

I thought all 3f's were carby here in OZ the yanks got the fuel injection


Yeah, ive been reading up on them now, but its always good to hear from as many ppl as possible


Thanks guys :cool:

James
Nice gq swb ute chop with a huffer for the good times
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

I think they were all 3F from 1984 onwards in OZ.
The 2F went out with the 45 series here.
The Americans had the 2F until the the 62 series come out with the fuel injected 3Fe.
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Posts: 744
Joined: Tue Dec 09, 2003 10:47 am
Location: Townsville.

Post by Fieldsy »

roscoFJ73 wrote:I think they were all 3F from 1984 onwards in OZ.
The 2F went out with the 45 series here.
The Americans had the 2F until the the 62 series come out with the fuel injected 3Fe.


all the FJ60's had the 2F till 84 and I am prity sure all were carb. in 85 when the FJ62 came in they went over to the 3F I know this coz that is were the motor in my shortie came from. and coz I'm good. ........ and the workshop manual say's so ....... and redbook.


















But as allways I could be wrong ;)
Team TAGATI

[quote="hottiemonster"]there seems to be a few people with quotes of mine in their sig, i guess i am just popular :D or just say some stupid things sometimes :lol:[/quote]
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Post by the_smoo »

the first few letters/ numbers of the vehicle identification number will tell you what donk it has..


no number in front of the F..... F motor
2 in front of the F..... 2F

i am almost definite that it will be a 2F unless it has been changed out from original ;)
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

the_smoo wrote:the first few letters/ numbers of the vehicle identification number will tell you what donk it has..


no number in front of the F..... F motor
2 in front of the F..... 2F

i am almost definite that it will be a 2F unless it has been changed out from original ;)


did you even read the original message?

reddo don't do it dude, stick with the diesel or convert it to a newschool EFI motor, all the F series motors are awful especially in fuel economy.
Free air locker to the first 20 callers!
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Post by the_smoo »

read everything but the 85 motor bit :oops: thought the question was a bit strange..

the replys make more sense now tho :lol:
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

offer fell through, no more help needed guys, but thanks very much :cool:



James
Nice gq swb ute chop with a huffer for the good times
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

Fieldsy wrote:
roscoFJ73 wrote:I think they were all 3F from 1984 onwards in OZ.
The 2F went out with the 45 series here.
The Americans had the 2F until the the 62 series come out with the fuel injected 3Fe.


all the FJ60's had the 2F till 84 and I am prity sure all were carb. in 85 when the FJ62 came in they went over to the 3F I know this coz that is were the motor in my shortie came from. and coz I'm good. ........ and the workshop manual say's so ....... and redbook.


Says the 3F was introduced in 84 here and also says the 3FE was introduced in 88 here but Ive never seen one(TLC FAQ)

Series Australia Canada U.S.A. Japan
B 78-80 NA NA 74-80
2B 80-82
3B 81-90 81-87 NA 81-90
13B-T ??-90 NA NA 84-90

F 58?-74 58?-74 55-74
2F 75-84 75-87 74-87
3F 84-92 NA NA
3F-E 88-92 88-92 88-92





















But as allways I could be wrong ;)
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests