Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MUD4B....WOOT WOOT
Speaking from previous experience with this little cb70 engine you are putting in.......don't crank too much boost or revs into this sucker. They love to revv but cannot take heaps of abuse. They are a highly strung little engine and finding parts can be an absolute arse unless you know where to look. Make sure you change the timing belt as they run an interference head.
Craig (who had one that ran 16psi with a WOlf3D computer, spat a bottom end & also snapped a timing belt which bent 8 out of 12 valves and dinted all 3 pistons)
Craig (who had one that ran 16psi with a WOlf3D computer, spat a bottom end & also snapped a timing belt which bent 8 out of 12 valves and dinted all 3 pistons)
Is the blown 1.6 a toyota 4agze as i've done a few already may be able to help with some info on parts to use hydraulic clutch conversions etc.
_____________________________________________________
Currrently running 89 soft top with 4agze, sprinter t50 5spd,rhopper series 3, 33-12.5 mud terrains,calmini 5inch lift kit [yeah i know nobody likes it the fangs but it has better approach than rears up front with chassis extension].
I might try & do build up thread on the next 2 zuks when some of the bits turn up from the US.
p.s hello to everyone as i'm new to the forum.
_____________________________________________________
Currrently running 89 soft top with 4agze, sprinter t50 5spd,rhopper series 3, 33-12.5 mud terrains,calmini 5inch lift kit [yeah i know nobody likes it the fangs but it has better approach than rears up front with chassis extension].
I might try & do build up thread on the next 2 zuks when some of the bits turn up from the US.
p.s hello to everyone as i'm new to the forum.
Why go pug/vw over the 2ct, esp when you know you can get approval for the toyota motor, and it was already a rwd motor?
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
the 2ct is getting old....the pug vw is still currant and is direct injection..
the sierra 5 speed will bolt up to it also and they are not as heavy as 2ct as they are alloy blocks...
the sierra 5 speed will bolt up to it also and they are not as heavy as 2ct as they are alloy blocks...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
mud4b wrote:the 2ct is getting old....the pug vw is still currant and is direct injection..
the sierra 5 speed will bolt up to it also and they are not as heavy as 2ct as they are alloy blocks...
bolt up
like with no adapter
Where do we all get them?
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
no you still need an adaptor....
but a sierra box wont even come close to bolting up to a 2ct..
where do you get em.......hopefully here soon if i can wing it....
you can find em at the wrecking yards but they charge a fortune...
but a sierra box wont even come close to bolting up to a 2ct..
where do you get em.......hopefully here soon if i can wing it....
you can find em at the wrecking yards but they charge a fortune...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Who is online
Users browsing this forum: No registered users and 0 guests