Have just bought an 1980 rangie and the high beam lever is not working, when you push it forward to the on position the head lights go out completely and when you pull it to flash nothing happens or changes, The wiring system is a bit of a mess, there are two relays/change overs 5 pin each with more things going in and out than you can poke a stick at. the car has dual batteries, dual alternators, driving lights, air compressor it was wired for a winch but the bloke sold the winch before i bought it but all the wiring is there also has air horns in there some where as well,
any help in this matter is muchly appreciated
Dixie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
High beam not working
Moderator: -Scott-
High beam not working
There is no such thing as a stupid question only stupid people
not sure if its -neg switched or +pos switched (im assuming +pos)
check all fuses.
do you have access to a multimeter?
sounds like the relay for the hi beams is not working.
check if the relay is switching.
if it is, check if theres power to the relay from your battery.
if its not, check if theres power coming from your switch.
if theres power to your switch but not from it. get a new switch.
check all fuses.
do you have access to a multimeter?
sounds like the relay for the hi beams is not working.
check if the relay is switching.
if it is, check if theres power to the relay from your battery.
if its not, check if theres power coming from your switch.
if theres power to your switch but not from it. get a new switch.
Who is online
Users browsing this forum: No registered users and 1 guest