Hi,
Was inspecting the main air cleaner (NOT Precleaner) yesterday, and noticed that there appeared to be some moisture inside the housing, which seemed to be very greasy. Then inspecting into the neck, where the housing attached to the engine, there seemed to be a lining of grease around the join. Does this sound OK, or should all the internals of this cover be bone dry?
I have been through some water lately, but not high enough to get into engine, and the filters are a little dirty, but not really any sign of water.
Thanks
Andrew
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Moisture in Air Cleaner Cover
Who is online
Users browsing this forum: No registered users and 1 guest