Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Lift heights

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Aza wrote:ok im bringing this thread back from the dead :roll:

my hight is 23.5" on 33" any others that havnt posted here what are u guys at???


in MM dude... or did you forget your maths :finger:
Top
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Contact:
Contact mudtoy

Post by mudtoy »

dave wrote:I'm running lux rears up front with 2in dropped hanger and 1/4 eliptic rear with a 4 link.


Dave, your pic looks like 1/2 eliptic rears (standard leaf design but obviously not placement) with rear shackles. I may be wrong but doesn't a 1/4 eliptic end on top of the diff housing (hence only being a quarter of an elipse).

The set up looks awesome and obviously works well though!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Mudtoy im guessing you are looking at his avitar pic. Thats old. Its now a ute with 1/4 eliptic.
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

GQ wrote:
Aza wrote:ok im bringing this thread back from the dead :roll:

my hight is 23.5" on 33" any others that havnt posted here what are u guys at???


in MM dude... or did you forget your maths :finger:


dont be so technical :finger: i'll find out in mm when i can then :roll:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

lol aza isnt you car on chassy stands it dotn work if so lol :lol: :finger: :finger: :finger: :finger:
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

no my car is sitting nicely on all fours :finger:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i just went and remeasured mine, i worked with the springs to bring the height down and on 35's i am 510mm.


Lowered it 70mm or about 2 inch which i am happy with.


NICK
TECH SCREW GURU
Top
Posts: 830
Joined: Tue Jul 29, 2003 11:29 pm
Location: Newcastle

Post by Old Yella »

mine is 570mm

with 2 inch spring lift and 50mm shackles
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

GQ wrote:
Aza wrote:ok im bringing this thread back from the dead :roll:

my hight is 23.5" on 33" any others that havnt posted here what are u guys at???


in MM dude... or did you forget your maths :finger:


596.9mm - there you go aza.
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

550mm with 33s.

i wanna lower it 2 inchs or so.
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

Far out Nick how do you keep urs so low wif 35's? You must have some body lift?
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

BTW 580mm on 33's.
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

i have a 2inch body lift.
TECH SCREW GURU
Top
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Contact:
Contact NICK

Post by NICK »

this is an old pic, but i planned to coil the rear and maintain the same height.
Image


i have alot more clearance in the front due to the fibreglass guards i have and the axle being so far foward.

when i first coiled the rear it was tall and i wasnt happy with it, i think it should work well now.


NICK
TECH SCREW GURU
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

590mm
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 52
Joined: Fri Jan 03, 2003 3:01 pm
Location: Sydney

Post by JohnJohn »

550 mm on 285/75/16 (33") tyres and full tank of diesel :D
Top
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

dave wrote:Interesting i am sitting at about 630mm from memory,
Come on guys theres heaps more of you out there! i wont to compare the hight of my truck compered to others.
The reason ive ask for this measurement is because theres a lot of people running mixed spring combs that would not know the lift & this gives a standard to compare all.


After a small amount of driving (2runs) the truck has now setteled down
and is about 600mm which im very happy about. :D Hopefully it will drop a little more with a few more runs.
Top
Posts: 90
Joined: Sat May 22, 2004 1:34 pm
Location: WA

Post by pulux »

575mm w/ 2" leaf springs and 33's.
She's an 83 hilux and i don't intend on lifting the chassis any higher. Maybe a body lift for 35s one day. Front axle is forward too so no rubs here. :)

Brad.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests