Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what transfer

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

what transfer

Post by mav »

what transfers will replace the viscous b/w transfer on a '91 rangie
will any earlier model one fit, manual or auto after the vacuum diff lock ones??????????
see ya mav
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

You need an LT230.

earlier rangies and post 4 speed RR.
Disco's have them also.

You want one with 1.192-1 high range gears, unles s yopu run large tyres then the easy option is to fit one from a deisel which are 1.4-1 this will help drive ability on the road but wont fix low range with the biggger rubber.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

the Deisel I have here is a 1.192 not the 1.4 like you mentioned I to got a deisel thinking it would be the 1.4 but its wasnt :?


EDIT: No sorry I lied, just double checked its 1.222 ratio :?: I new it wasnt 1.4 but wasnt hundred percent sure what it was.

Cheers Anthony
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

The defenders definately had the 1.4:1 transfer boxes. This is what I am running and fixed up high range with 33's on perfectly.
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

Got a 1.41 HR Defender LT230 in the shed, ready and waiting :armsup:

Just got to get motivated as it's such a shit job :bad-words:

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 705
Joined: Thu May 13, 2004 7:29 pm

Post by daddylonglegs »

Does anyone know if the output shaft on the ZF auto is the correct length
and if the bolt pattern where the adaptor housing attaches to the viscous transfercase is the same as for the LT230 ?
Bill.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

daddylonglegs wrote:Does anyone know if the output shaft on the ZF auto is the correct length
and if the bolt pattern where the adaptor housing attaches to the viscous transfercase is the same as for the LT230 ?
Bill.


I seem to remember a post on pirate from someone who did this conversion saying there were 2 different spline lengths output shafts on the ZF - will have a look.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Read this Bill. You really should spend some time wading through the BS on pirate - lots of good tech hidden away.

http://www.pirate4x4.com/forum/showthre ... t230+input
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 14
Joined: Sun Dec 22, 2002 4:16 pm
Location: Auburn California USA

Post by JSBriggs »

more swap trivia

http://www.pirate4x4.com/forum/showthread.php?t=99159

-Jeff
All it needs is just a little luvin'
Top
Posts: 705
Joined: Thu May 13, 2004 7:29 pm

Post by daddylonglegs »

thanks Ben, When I settle into more permanent accomodation and sign up with a service provider I will be able spend more time wading through the bullshit on pirate. but at this time I am on prepaid 25hr for $20 time limits and I found pirate ate up too much time. I only asked about the output shafts to point out to others the possible traps when doing what at first glance may appear to be a simple straighforward conversion.
I am no longer in the motor industry and would not personally own a LandRover later than 87, so a lot of the tech discussions I participate in have no practical value for me anymore. it is just academic interest now.
Bill.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Fair enough Bill. I am in the same boat as you - I don't think I will ever buy a landie newer than the 1987 county I have now. I plan on keeping it a looooong time.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

You learn something new every day. I never knew that they were diffrent, always though they were the same.

I remember someone asking me this once and I wasn't sure. I now know.

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Aquarangie wrote:You learn something new every day. I never knew that they were diffrent, always though they were the same.

I remember someone asking me this once and I wasn't sure. I now know.

Trav


Depends on the year model of the box and T-case whether they are different or not.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

Your post now prompts me to check the shaft fitment on my Defender LT230 I have stashed away in the shed.

I have a old output shaft laying around that's the same as one in mine. I'll check it out on the weekend.

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Want to sell me your spare LT230 Trav???
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 41 guests