Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lightforce 'BREATHER KIT' pre market release FREE...
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Lightforce 'BREATHER KIT' pre market release FREE...
Many of you probably sussed I work for Lightforce but i've always refrained from ramming LF down peoples throats. This is a forum and not a sell fest. But I wish to give something back that is particularly relevant to the conditions under which many of you drive.
The breather system will soon be standard on all LF lights but the kit can be retrofitted to any LF light with an alloy globe holder and a 'pilot' type hole moulded into rear of the arm. Basically it works the same way you may plumb a diff or winch and thus makes the light fully submersible and impervious to most contamination etc turned on or off, upside down (yes CHEEZY THIS MEANS YOU), inside out?
What i'm offering is free to the first 20 Outer Limits members who contact me via PM. This kit is absolutely of no use with any other type of light. When released as a RETRO fit accessory it will retail for approx $15.00. (No I cannot sponsor anybody...)
The breather system will soon be standard on all LF lights but the kit can be retrofitted to any LF light with an alloy globe holder and a 'pilot' type hole moulded into rear of the arm. Basically it works the same way you may plumb a diff or winch and thus makes the light fully submersible and impervious to most contamination etc turned on or off, upside down (yes CHEEZY THIS MEANS YOU), inside out?
What i'm offering is free to the first 20 Outer Limits members who contact me via PM. This kit is absolutely of no use with any other type of light. When released as a RETRO fit accessory it will retail for approx $15.00. (No I cannot sponsor anybody...)
Last edited by avgas454 on Tue Feb 11, 2003 4:28 pm, edited 3 times in total.
"Now should read AVGAS 502... "Yes officer, this engine was a factory option..."
http://www.avgas.com.au
http://www.avgas.com.au
If I had some LF lights I would get a kit. Maybe I should get a kit, so it will make me buy lightforce lights
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
ToNkA wrote:If I had some LF lights I would get a kit. Maybe I should get a kit, so it will make me buy lightforce lights
God there has to be some logic there.... somewhere....? I dont know grasshopper.... nothing succeeds like a budgie without a beak?
"Now should read AVGAS 502... "Yes officer, this engine was a factory option..."
http://www.avgas.com.au
http://www.avgas.com.au
ROFL
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Still a few left ... just remember your lights must have a premoulded pilot hole (which is currently 'blind' in the rear of the arm). The kit will take approx 15 mins to install and then you can go mullet herding at night...
Last edited by avgas454 on Tue Feb 11, 2003 5:02 pm, edited 1 time in total.
"Now should read AVGAS 502... "Yes officer, this engine was a factory option..."
http://www.avgas.com.au
http://www.avgas.com.au
avgas454 wrote:Still a few left ... just remember your lights must have a premoulded pilot hole (which is currently 'blind' in the rear of the arm). The kit will take approx 15 mins to install and then you can go fish herding at night...
mine are around 6 feet from the deck, but ill find a gnarly river crossing and get pics
hands and mums dont count!!!
bj on roids wrote:avgas454 wrote:Still a few left ... just remember your lights must have a premoulded pilot hole (which is currently 'blind' in the rear of the arm). The kit will take approx 15 mins to install and then you can go fish herding at night...
mine are around 6 feet from the deck, but ill find a gnarly river crossing and get pics
WELL BJ... judging by your signature animation...
consider yourself "OWNED"....
"Now should read AVGAS 502... "Yes officer, this engine was a factory option..."
http://www.avgas.com.au
http://www.avgas.com.au
It has been great hearing from you guys!... I'm going to make up some more kits as we really appreciate your enthusiasm and feedback.
CHEEZY get back out there and GET PACKIN'.... "Elves do it better with RUM?"... I don't get it?
CHEEZY get back out there and GET PACKIN'.... "Elves do it better with RUM?"... I don't get it?
"Now should read AVGAS 502... "Yes officer, this engine was a factory option..."
http://www.avgas.com.au
http://www.avgas.com.au
Who is online
Users browsing this forum: No registered users and 5 guests