hi @ll
well as every other hiluxdriver im looking for some power
ich could get a rangerover from 1985 for 500€
first i thought of swaping just the motor, but maby it would be
easyer (cheaper) if i swap the whole drivetrain??
what about the axles?? swap them also??
i know ruff did the swap, and it should fit pretty good
are there more pics??
sid
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rangeV8 in the Lux.... need more infos
Moderators: toaddog, Elmo, DUDELUX
Rover V8
Pretty straight forward actually. But here are some of the pitfalls
1. If using the Rover auto and transfer, output is high and to the right. So with a bit of lift (rear leafs in front) you will have trouble with the Uni's up front. They will bind on the smallest amount of downtravel
2. Cant fit the double cardin next to the gearbox so must be a uni on the box end.
I solved both these problems by linking the front end and pushing the diff forward. Also built a custom shaft that uses a CV at the top end rather than a uni or DC joint. A Standard Hilux CV just fits. Any bigger and you would be in trouble.
3. In the Gen 1 engine bay there is not enough room to put the radiator under the bonnet. Maybe you could putt it in front of the radiator support and space the grill out or something. I put my radiator on the tray. Gen 2 engine bays have anough room (Just) to fit a standard deisel radiator. I am about to put a bigger radiator in mine as the current one is a bit small and the engine runs a bit hot.
Anyway here is a link to some pics etc in the members section http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=13267&highlight=pesky+petes+project
1. If using the Rover auto and transfer, output is high and to the right. So with a bit of lift (rear leafs in front) you will have trouble with the Uni's up front. They will bind on the smallest amount of downtravel
2. Cant fit the double cardin next to the gearbox so must be a uni on the box end.
I solved both these problems by linking the front end and pushing the diff forward. Also built a custom shaft that uses a CV at the top end rather than a uni or DC joint. A Standard Hilux CV just fits. Any bigger and you would be in trouble.
3. In the Gen 1 engine bay there is not enough room to put the radiator under the bonnet. Maybe you could putt it in front of the radiator support and space the grill out or something. I put my radiator on the tray. Gen 2 engine bays have anough room (Just) to fit a standard deisel radiator. I am about to put a bigger radiator in mine as the current one is a bit small and the engine runs a bit hot.
Anyway here is a link to some pics etc in the members section http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=13267&highlight=pesky+petes+project
sid wrote:thanks for the reply´s
ok,i will keep my axles, allready have a locker, and a LSD
@pete i have a 2gen
so my biggest problem is the front driveshaft?
did u use the hilux fuelpump ?
sid
Driveshaft is only a problem if you are using the rover box and transfer. If using a standard hilux box with adapter plate/ bellhousing, the angle appears to be pretty goo. The Rover output is very high and forward compared to the Hilux output if that makes sense
Try http://www.dellowauto.com.au/ looking at doing one myself. Dellows do a conversion kit from rover v8 to lux 5sp
Yeah mate wrote:Try http://www.dellowauto.com.au/ looking at doing one myself. Dellows do a conversion kit from rover v8 to lux 5sp
When i spoke to Dellow 2 years ago just before i did my Rover V8 conversion they told me they had 1 bellhousing left and were not planning on making anymore. I ended up buying a complete conversion from a wrecker.
GQ wrote:put patrol diffs under the lux..
under hypolux's member section
Why? This would be a wast of Money.
Sure the crown and pinion may be stronger than a hilux but thats where it stops. There is very little you can do to strengthen the CVs. At least there are a lot of aftermarket options for the Toyota CV.
I run Hilux Diffs in my buggy and have had no real problems considering the way it is constantly abused. I have damaged one rear Crown and Pinion and i put this down to poor gear set up which i did my self.
Who is online
Users browsing this forum: No registered users and 17 guests