Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hi all.. due to a moment of stupidity i now need a rear left side tail light lens & side lens for a 87 rangie & a rear bumper for either a 2door or 4door rangie. if you have any of these bits let me know how much & where you are & i'll get sorted!
thanks for your help.
ad
hi john,
mount is the same throughout but the later models had the plastic end caps. either is fine but the 2 door one is stronger. strong is good!! especially if you do dumb things like i did
adnic wrote:hi john, mount is the same throughout but the later models had the plastic end caps. either is fine but the 2 door one is stronger. strong is good!! especially if you do dumb things like i did
Stronger when you weld a big lump of pipe into the bar too !!
hi all.. due to a moment of stupidity i now need a rear left side tail light lens & side lens for a 87 rangie & a rear bumper for either a 2door or 4door rangie. if you have any of these bits let me know how much & where you are & i'll get sorted!
