Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ center into GU housing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

GQ center into GU housing

Post by duncan »

With out being told to go search as i have and didnt realy find an answer can anyone who has done it let me no can i fit the center out of a GQ straight into a GU housing or if not can i at least fit the ring and pinion of the GQ on to the gu center will a GQ diff lock fit or do i have to by a new diff lock to suit the GU housing.

Answeres would be appreciated thanks
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

yes. swap the whole centre
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Thanks Wendle so i take it that if i can swap in my centers from my GQ then the lockers will suit the spline count on the axles of the GU ones .Will the calipers just bolt up also or do i have to change the master cylinder to suit with the twin piston brakes compared to the single piston ones on the GQ
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

i *think* the master cylinder is the same?
the twin piston calipers on the later GQ's use the same MC.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests