Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux toe in

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Hilux toe in

Post by HIL01X »

Anyone know what the toe in on a 94 (ln106) should be :?:
Thanks, Graeme.
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

You should not have any toe in
IFS 3mm toe out
live axle 0 to 1 mm toe out
Top
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Post by HIL01X »

Thanks for that toyrex. I've got about 4-5mm atm and the steering wheel is a bit crooked. Must have coped a bit of abump somewhere ;)
Allways been a TOYOTA man.
Now I'm old and grumpy as well.
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Post by toyrex »

Check the track rod it might be bent if so straighten it

Adrian
Top
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Post by HIL01X »

YEP it was (tie rod bent). Have toe in right but the steering wheel is still crooked. I think the J arm may be bent as it touched the upper bump stop under full articulation so I ground about 6mm of it. All fixed now.

Rough enough is good enough :? ;) :cry: :oops: :P :x :lol: :) :cool:
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 2 guests