Need some advice.
For some time now I have been thinking about gettingone of those Ox hydraulic winches that work off the power steering circuit.
ANyway I had an idea that with lockers I could use a wheel winch instead (much cheaper).
Does anyone know if you can still buy these (I remeber at least 20 years ago , you could).
basically it is a hub that attaches to your rim using your wheel nuts.
You then use a rope wrapped around the hub as a winch powered by the drive to your wheels. This could be used on the front or the rear.
What do you guys reckon??
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wheel winch
Moderator: -Scott-
wheel winch
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
I used to do something similar on the old 4runner.
worked well if it was just a bit of mud etc you were stuck in, But, if you were quite stuck or had a rock etc on your way, Bang goes the CV!
So wouldn't recommend it, I went and bought a hand winch and air locker, and have never used the hand winch since
After my first Real "play" with the Pajero on the weekend on tracks that I know well I'm pretty happy, but will definately be looking at getting the airlocker now it's avail and also doing something with the front wheel travel.
worked well if it was just a bit of mud etc you were stuck in, But, if you were quite stuck or had a rock etc on your way, Bang goes the CV!
So wouldn't recommend it, I went and bought a hand winch and air locker, and have never used the hand winch since
After my first Real "play" with the Pajero on the weekend on tracks that I know well I'm pretty happy, but will definately be looking at getting the airlocker now it's avail and also doing something with the front wheel travel.
96 Paj 2.8 TD 2" lift, Snorkel, LR Tank, Dual Batt, winch, 32 MTRs, RT tent and rack, polyairs etc
Ian,
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian,
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian,
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian,
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian,
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
Don't know about the wheel winch - the problem with them is that the tyres' rolling diameter is bigger than that of the rim(winch drum) that you would bolt onto the studs. this means as soon as the wheel that the winch is mounted on gets any traction the cable gets loose and falls off and wraps around the bloody wheel.
However I can recommend the OX hydraulic winch as I have one on my NJ - its awsome, I have used mine heaps for all sorts of stuff ( draging landrover defenders out of the mud moslty ) and I love that fact that it will pull al day long with the enging just idling - the only thing is that they are vey slow compared to an electric(yuk) one.
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Ian,
The trouble with wheel winches is that the tyre that is on the wheel that the drum(winch) is bolted to is a larger diameter than the drum so as soon as the wheel gets traction the cable comes loose and falls off and then wraps around the bloody wheel.
But I can fully recommend the OX hydraulic winch - I have one on my NJ and its awsome - I espacially love the way it pulls all day with the engine at idle ( no dead batteries or burnt out 12v motors)
the only thing is that, compared to an electric one, they're a bit slow
Ado
The trouble with wheel winches is that the tyre that is on the wheel that the drum(winch) is bolted to is a larger diameter than the drum so as soon as the wheel gets traction the cable comes loose and falls off and then wraps around the bloody wheel.
But I can fully recommend the OX hydraulic winch - I have one on my NJ and its awsome - I espacially love the way it pulls all day with the engine at idle ( no dead batteries or burnt out 12v motors)
the only thing is that, compared to an electric one, they're a bit slow
Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Who is online
Users browsing this forum: No registered users and 0 guests