Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A few questions

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

A few questions

Post by ranover »

How is it lads
I was just wondering what's the best suspension setup to have, The coils strapped in or to use dislocation cones. shortly i'm upgrading to 33 inch tires but was thinking i should get a diff lock with stronger axles first, will the standard axles cope.and is it true you should use engine oil in the 4 speed gearbox ? I have an 83 4dr rangie Thanks for the help. RANOVER
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

(1) I search here and on pirate4x4.com - dislocating suspension Vs fully retained has been discussed extensively.

(2) It all depends on how hard you drive. Maxi or JM diff lock will make breakage less likely. Again search - maybe under "aquarangie" - he has broken some 10 spline axles with an ARB locker.

(3) Yes, engine oil or really light gear oil like Castrol VMX80 in an LT95
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 87
Joined: Wed Mar 19, 2003 8:12 pm
Location: Gold Coast QLD

Post by the naked Duck »

Maxidrive axles and locker were the best thing I've ever done to the Rangie. Go the rear locker first to minimze breakage.
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

would you use engine oil in the transfer case aswell
Posts: 87
Joined: Wed Mar 19, 2003 8:12 pm
Location: Gold Coast QLD

Post by the naked Duck »

Ummmm................yes.............I hope :shock:
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

ranover wrote:would you use engine oil in the transfer case aswell


The reason that you must use light oil in the gearbox is to prevent failure of the oil pump (fibre gears).

90 weight is ok in the transfer, but often the seal between the gearbox and transfer leaks from the gearbox to the transfer (oil level goes up in transfer, down in gearbox. Some peeps run a hose between the level plugs of the gearbox and transfer to equalise them - if you have this, then run engine oil in both.
John
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests