urgent help needed... body lift sizes

[De-lux]

urgently need exact sizes for 2 inch body lift for 1993 LN106R dual cab hilux diesel. im going to buy the stuff now. and i already have the nylon.

1. how many bolts
2. lengths / widths
3. type of bolt
4. nuts, washers etc
5 anything else i forgot.

thanks team

[-Scott-]

urgently need exact sizes for 2 inch body lift for 1993 LN106R dual cab hilux diesel. im going to buy the stuff now. and i already have the nylon.

1. how many bolts
2. lengths / widths
3. type of bolt
4. nuts, washers etc
5 anything else i forgot.

thanks team

1. NFI
2. Get metric - the rest of your car will be. When I fronted to buy bolts I asked for "M10" and he came back with 3/8 UNC - because he measured one of my original bolts at a fraction under 10mm.
3. Grade 8.8 or better
4. Nyloc nuts or spring washers + original washers from the car
5a. Queensland Transport will ping you for nylon lift blocks unless they have a metal crush tube.
5b. They'll also ping you for lifting more than 50mm.
5c. Make sure the blocks are at least as large (diameter wise) as the original rubbers/whatever is in there - if you go smaller you concentrate the load and risk cracking the floor.

Good luck,

Scott

[maty]

60mm diameter everywhere except the two front mounts 50mm diameter
NJ SWB said it all.

[high n mighty]

And look for the other points that the body rests on and lift then accordingly using rhs or whatever is handy, also saves cracking of the body but , most people overlook it