Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

go to a petrol or keep the diesel

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 46
Joined: Sat Jul 24, 2004 5:30 pm
Location: warragul

go to a petrol or keep the diesel

Post by cruiserkid »

i have a bj70 landcruiser with a 3b diesel with a t3 garret turbo on it.
i am thinking about putting a 3.8 litre vt commondore motor in and either turboing it or supercharging it.
i want enough power to turn 35's.
what should i do? :?:
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Re: go to a petrol or keep the diesel

Post by STUMPY »

cruiserkid wrote:i have a bj70 landcruiser with a 3b diesel with a t3 garret turbo on it.
i am thinking about putting a 3.8 litre vt commondore motor in and either turboing it or supercharging it.
i want enough power to turn 35's.
what should i do? :?:



NOT POST IT THREE TIMES :finger: :finger:
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 125
Joined: Fri Jan 02, 2004 3:38 pm
Location: perth - for the time being, Leaving when I can afford it

Post by Birlo »

I'll answer - depends what you want
Get up and go or low down torque
I'm a diesal man
But decide that and your sweet
Either's good for offroad work - Just diesal's won't die on ya
got 420000kms on my clock and the old 2H is still goin'
I doubt a petty would
You can't kill a 60... Believe me... I've tried...
In the end, you can... drive a gu now... still want a 60
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Leave the motor alone and change the transfer case gears.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

i'm confused. You already have more than enough power to turn 35" tyres. I don't see any problem with your current setup.
Top
Posts: 11
Joined: Sat Mar 27, 2004 10:48 am
Location: melbourne

Post by cdnes »

Tojo wrote:i'm confused. You already have more than enough power to tur n 35" tyres. I don't see any problem with your current setup.
I agree
Top
Posts: 46
Joined: Sat Jul 24, 2004 5:30 pm
Location: warragul

Post by cruiserkid »

just from wathching all the guys at the ateco challenge the other week it seems that you need lots power to pull up those big hills fast, i dont want to die half way i want full power all the way.
thats for the input though youse have helped alot.
i might just play around the gearing
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest